German NAV SYSTEM sensor NAV SYSTEM model NAV SYSTEM price

NAV SYSTEM sensor accurately measures the actual displacement value of the detected product by precisely detecting the absolute position of the movable magnetic ring through internal non-contact measurement and control technology; the high precision and high reliability of this sensor have been widely applied in thousands of practical cases. Since the movable magnetic ring for position determination and the sensitive element do not come into direct contact, the sensor can be used in extremely harsh industrial environments and is not easily affected by oil stains, solutions, dust, or other contaminants. In addition, the sensor uses high-tech materials and advanced electronic processing technology, enabling it to operate in high-temperature, high-pressure, and high-vibration environments. The sensor output signal is an absolute displacement value; even if the power is interrupted and reconnected, data will not be lost, and there is no need to re-zero. Since the sensitive element is non-contact, repeated detection will not cause any wear to the sensor, greatly improving detection reliability and service life.

NAV SYSTEM sensor classification

1) Potentiometric displacement sensors convert mechanical displacement into resistance or voltage output that has a linear or arbitrary functional relationship. Ordinary linear potentiometers and circular potentiometers can be used as linear displacement and angular displacement sensors, respectively. However, potentiometers designed for displacement measurement require a definite relationship between displacement change and resistance change. The movable brush of the potentiometric displacement sensor is connected to the measured object. The displacement of the object causes a resistance change at the moving end of the potentiometer. The amount of resistance change reflects the magnitude of displacement, while an increase or decrease in resistance indicates the direction of displacement. Usually, a power supply voltage is applied to the potentiometer to convert the resistance change into a voltage output. In wire-wound potentiometers, the resistance changes in steps based on the turn resistance as the brush moves, resulting in a stepped output characteristic. If such a displacement sensor is used as a displacement feedback element in a servo system, excessive step voltage may cause system oscillation. Therefore, the resistance per turn should be minimized during potentiometer manufacturing. Another major disadvantage of potentiometric sensors is susceptibility to wear. Their advantages include simple structure, large output signal, ease of use, and low cost. 2) Magnetostrictive displacement sensors accurately measure the actual displacement value of the detected product by precisely detecting the absolute position of the movable magnetic ring through non-contact measurement and control technology; the high precision and high reliability of this sensor have been widely applied in thousands of practical cases. Since the movable magnetic ring for position determination and the sensitive element do not come into direct contact, the sensor can be used in extremely harsh industrial environments and is not easily affected by oil stains, solutions, dust, or other contaminants, with an IP protection rating of IP67 or higher. In addition, the sensor uses high-tech materials and advanced electronic processing technology, enabling it to operate in high-temperature, high-pressure, and high-vibration environments. The sensor output signal is an absolute displacement value; even if the power is interrupted and reconnected, data will not be lost, and there is no need to re-zero. Since the sensitive element is non-contact, repeated detection will not cause any wear to the sensor, greatly improving detection reliability and service life. Magnetostrictive displacement sensors accurately measure position by utilizing the magnetostrictive principle, where the intersection of two different magnetic fields generates a strain pulse signal. The measuring element is a waveguide, and the sensitive element inside the waveguide is made of special magnetostrictive material. The measurement process involves generating a current pulse in the sensor's electronics chamber, which travels through the waveguide, creating a circumferential magnetic field outside the waveguide. When this magnetic field intersects with the magnetic field generated by the movable magnetic ring sleeved on the waveguide (which changes with position), a strain mechanical wave pulse signal is generated within the waveguide due to the magnetostrictive effect. This strain mechanical wave pulse signal travels at a fixed speed of sound and is quickly detected by the electronics chamber. Since the transmission time of this strain mechanical wave pulse signal within the waveguide is proportional to the distance between the movable magnetic ring and the electronics chamber, measuring the time allows for highly precise determination of this distance. Since the output signal is a true absolute value, rather than a proportional or amplified signal, there is no signal drift or value variation, and no periodic recalibration is required. Magnetostrictive displacement sensors are high-precision, long-stroke absolute position measurement displacement sensors manufactured based on the magnetostrictive principle. They adopt a non-contact measurement method; since the movable magnetic ring used for measurement does not directly contact the sensor itself, friction and wear are avoided, resulting in long service life, strong environmental adaptability, high reliability, good safety, and convenience for system automation. Even in harsh industrial environments, they can operate normally. Furthermore, they can withstand high temperatures, high pressures, and strong vibrations, and are now widely used in the measurement and control of mechanical displacement.

NAV SYSTEM sensor working principle

Magnetostrictive displacement (level) sensors accurately measure position by utilizing the magnetostrictive principle, where the intersection of two different magnetic fields generates a strain pulse signal. The measuring element is a waveguide, and the sensitive element inside the waveguide is made of special magnetostrictive material. The measurement process involves generating a current pulse in the sensor's electronics chamber, which travels through the waveguide, creating a circumferential magnetic field outside the waveguide. When this magnetic field intersects with the magnetic field generated by the movable magnetic ring sleeved on the waveguide (which changes with position), a strain mechanical wave pulse signal is generated within the waveguide due to the magnetostrictive effect. This strain mechanical wave pulse signal travels at a fixed speed of sound and is quickly detected by the electronics chamber. Since the transmission time of this strain mechanical wave pulse signal within the waveguide is proportional to the distance between the movable magnetic ring and the electronics chamber, measuring the time allows for highly precise determination of this distance. Since the output signal is a true absolute value, rather than a proportional or amplified signal, there is no signal drift or value variation, and no periodic recalibration is required.

NAV SYSTEM sensor application areas

Widely applicable for level measurement and control of various liquid tanks in industries such as petroleum, chemical, water conservancy, pharmaceutical, food, and beverage, as well as aerospace refueling systems, automotive refueling systems, diesel refueling systems, various hydraulic tanks, hydrological monitoring, and water treatment. Magnetostrictive displacement sensors are high-precision, long-stroke absolute position measurement displacement sensors manufactured based on the magnetostrictive principle. They adopt an internal non-contact measurement method; since the movable magnetic ring used for measurement does not directly contact the sensor itself, friction and wear are avoided, resulting in long service life, strong environmental adaptability, high reliability, good safety, and convenience for system automation. Even in harsh industrial environments (such as those prone to oil stains, dust, or other contamination), they can operate normally [01]. In addition, they can withstand high temperatures, high pressures, and strong vibrations, and are now widely used in the measurement and control of mechanical displacement. Their stroke can reach 3 meters or longer, with a nominal accuracy of 0.05% F·S; for sensors with a stroke of 1 meters or more, the accuracy can reach 0.02% F, S, and repeatability can reach 0.002% F·S. Therefore, they are widely used in industries such as petrochemical, aerospace, electric power, and water conservancy.

Weidou Intelligent Technology specializes in selling German NAV SYSTEM sensors, NAV SYSTEM proximity sensors, NAV SYSTEM distance sensors, NAV SYSTEM vision sensors, NAV SYSTEM displacement sensors, NAV SYSTEM load cells, NAV SYSTEM speed sensors, NAV SYSTEM photoelectric sensors, NAV SYSTEM position sensors, NAV SYSTEM angle sensors, NAV SYSTEM tactile sensors, NAV SYSTEM temperature sensors, NAV SYSTEM pressure sensors, NAV SYSTEM flow sensors, NAV SYSTEM level sensors, NAV SYSTEM motion sensors, NAV SYSTEM process sensors. Original imports from Germany. Welcome inquiries and orders from users.