German GBF TECNOMEC sensors, GBF TECNOMEC models, GBF TECNOMEC prices

GBF TECNOMEC sensors, also known as linear sensors, are linear devices based on metal induction. The function of the sensor is to convert various measured physical quantities into electrical signals. In production processes, displacement measurement is generally divided into two types: measuring physical dimensions and measuring mechanical displacement. Depending on the form of transformation of the measured variable, displacement sensors can be divided into analog and digital types. Analog types can be further divided into property-based and structural types. Commonly used displacement sensors are mostly analog structural types, including potentiometric displacement sensors, inductive displacement sensors, synchros, capacitive displacement sensors, eddy current displacement sensors, and Hall effect displacement sensors. An important advantage of digital displacement sensors is that they facilitate direct input of signals into computer systems. These sensors are developing rapidly and their application is becoming increasingly widespread.

GBF TECNOMEC Sensor Classification

1) Laser speed measurement: With the rise of precision manufacturing and the need for cost savings, non-contact speed sensors are gradually replacing contact speed sensors. Currently, the most accurate and commonly used non-contact laser speed sensor on the market is the ZLS-Px aberration speed sensor. The aberration speed sensor has two ports: one emission port that emits a LED light source, and one high-speed photography port that achieves CCD area high-speed imaging comparison. By comparing images at two points in time within an extremely short period, the distance moved by the object under test is determined, and combined with internal algorithms, the sensor outputs the object's speed in real time. As shown in the figure, (1) is the LED light emission port, (2) is the camera reception port, (3) and (4) are terminal blocks, and (5) are mounting screw holes. The (1) LED light emission port emits laser light toward the object under test, which reflects to the (2) camera reception port. Upon receiving the signal, it is transmitted to the signal processor, which calculates the speed using algorithms. The ZLS-Px aberration speed sensor can simultaneously measure speed and length in two directions. It can detect not only whether the object under test has stopped but also its direction of motion. Mount the sensor on a stable bracket to ensure that the rotating object does not generate excessive vibration during rotation, thereby allowing measurement of the rotation angle and rotational speed of the object under test. 2) Radar speed measurement: Traditional speed measurement mostly involves rotary motion speed measurement and linear motion speed measurement. However, there are many irregular speed measurement scenarios in industrial automation, such as athlete speed measurement, traffic vehicle speed measurement, and golf ball speed measurement. Radar speed sensors can meet these requirements.

GBF TECNOMEC Sensor Principle

A transmissive speed sensor consists of a slotted or notched disk, a light source, and a phototube. When the disk rotates with the shaft under test, light can only reach the phototube through the holes or notches. When the phototube is illuminated, its reverse resistance is very low, outputting an electrical pulse signal. When the light source is blocked by the disk, the phototube's reverse resistance is very high, and no signal is output. Thus, based on the number of holes or notches on the disk, the rotational speed of the shaft under test can be measured. The usual number of disk holes or notches is unclear in the source, so when the shaft under test completes one revolution, the photoelectric converter outputs 60 pulse signals. If the time base signal of the electronic counter is set to 1s, the rotational speed of the shaft under test can be read directly. The principle of a reflective speed sensor is similar to that of a transmissive sensor; it converts changes in received light into electrical signal changes via a phototube, but it obtains pulse signals through light reflection. Typically, reflective material is adhered to the measurement area of the shaft under test to form a reflective surface. Commonly used reflective materials include special speed-measuring reflective tape (adhesive tape), or aluminum foil and other reflective materials may be used as substitutes. Sometimes, white paint can be applied to the measurement area to serve as a reflective surface. The projector and reflective surface must be properly configured, typically with a distance of 5-15M between them. When the shaft under test rotates, the photoelectric element receives pulsed light and outputs corresponding electrical signals to the electronic counter, thereby measuring the rotational speed of the shaft. The waveform of the output signal from photoelectric speed sensors is relatively regular, close to a standard square wave, with almost no interference signals generated. However, vibration in transmissive types can reduce the lifespan of the light source, making them unsuitable for conditions with strong vibration. Reflective types have no mechanical connection with the shaft under test and are convenient to use.

GBF TECNOMEC Sensor Industry Applications

1) Modern automobiles are generally equipped with engine control, autonomous driving, ABS, TRC, automatic door locking, active suspension, guidance systems, electronic instruments, and other devices, all of which require vehicle speed signals. Therefore, the accuracy and stability of the output signals from speed sensors will greatly affect these control units. Automotive speed sensors mostly adopt a Hall effect structure. A Hall speed sensor is a magnetoelectric sensor based on the Hall effect, characterized by high sensitivity to magnetic fields, stable output signals, high frequency response, strong anti-electromagnetic interference capability, simple structure, and ease of use. It mainly consists of permanent magnets with a specific number of pole pairs (generally 4 or 8 pairs), Hall elements, a rotating mechanism, and input/output connectors. Its working principle is that when the sensor's rotating mechanism rotates under external drive, it drives the permanent magnet to rotate, causing periodic changes in the magnetic field passing through the Hall element. This induces changes in the output voltage of the Hall element, which are processed by subsequent circuits to form stable pulse voltage signals as the output of the speed sensor. Key electrical technical parameters of Hall structure speed sensors include: high output voltage, low output voltage, duty cycle, period, rise time, fall time, and pulses per cycle. To ensure product performance reliability, these parameters must be quantitatively tested before factory shipment. Test systems featuring integration and intelligence, efficient automatic measurement, software calculation, and graphical or tabular display of results are increasingly favored by automotive speed sensor manufacturers. A comprehensive testing device has been developed for performance measurement of commonly used Hall effect vehicle speed sensors. Based on cost considerations, the high-speed counter port of a microprocessor is used for data acquisition from the vehicle speed sensor, and software control is used to calculate and graphically display the acquired data. The completed testing device offers advantages such as high testing accuracy, reliable data communication, a user-friendly graphical interface, strong anti-interference capability, simple and intuitive testing process, and low system development cost. It has good market promotion potential, indicating significant application prospects for speed sensors in vehicle speed detection. 2) Speed sensors for belt conveyors use Hall sensors, which are sensors that utilize the Hall effect to achieve magnetoelectric conversion. The Hall effect was discovered in 1879 and has a development history of over 100 years. However, its application gained attention and widespread adoption in the 50s of this century due to the rapid development of microelectronics, leading to the continuous development of various Hall elements. China began increasing research on Hall elements in the 20s of the 70th century. After nearly several decades of research and development, it is now possible to produce Hall elements with various performances, such as standard type, high sensitivity type, low temperature coefficient type, temperature and magnetic measurement type, and switch type. Due to the characteristics of Hall sensors, such as high sensitivity, good linearity, high stability, small size, and high temperature resistance, they are widely used in various industrial fields including non-electrical quantity measurement and automatic control, computer devices, and modern military technology.

Weidou Intelligent Technology specializes in selling German GBF TECNOMEC sensors, GBF TECNOMEC proximity sensors, GBF TECNOMEC distance sensors, GBF TECNOMEC vision sensors, GBF TECNOMEC displacement sensors, GBF TECNOMEC load cells, GBF TECNOMEC speed sensors, GBF TECNOMEC photoelectric sensors, GBF TECNOMEC position sensors, GBF TECNOMEC angle sensors, GBF TECNOMEC tactile sensors, GBF TECNOMEC temperature sensors, GBF TECNOMEC pressure sensors, GBF TECNOMEC flow sensors, GBF TECNOMEC level sensors, GBF TECNOMEC motion sensors, and GBF TECNOMEC process sensors. Original imports from Germany. Welcome inquiries and orders from users.