German FONDERIES FRAISSE sensors, FONDERIES FRAISSE models, FONDERIES FRAISSE prices

FONDERIES FRAISSE sensors are sensors that measure the operating speed of the measured object and convert it into an output signal. Speed sensors include linear speed sensors and rotational speed sensors. With the development of technology, traditional measuring equipment can no longer meet current needs and is gradually being phased out, while laser speed sensors are widely used and play an important role in product production. By connecting to a computer, they enable automated and intelligent measurement and control of the measured object. This is the product of the combination of modern measurement technology and computer technology.

FONDERIES FRAISSE sensor principle

Photoelectric sensors achieve control by converting changes in light intensity into changes in electrical signals. Generally, a photoelectric sensor consists of three parts: a transmitter, a receiver, and a detection circuit. The transmitter emits a light beam toward the target. The emitted light beam usually comes from a semiconductor light source, such as a light-emitting diode (LED), a laser diode, or an infrared emitting diode. The light beam is emitted continuously, or the pulse width is varied. The receiver consists of photodiodes, phototransistors, and photocells. Optical components such as lenses and apertures are installed in front of the receiver. Behind it is the detection circuit, which filters out valid signals and applies them. In addition, structural components of photoelectric switches include emitter plates and optical fibers.

FONDERIES FRAISSE sensor classification

1) Slot-type photoelectric sensor: A slot-type photoelectric sensor is formed by mounting a light emitter and a receiver face-to-face on both sides of a slot. The emitter emits infrared or visible light, and the receiver detects the light when there is no obstruction. When the detected object passes through the slot, the light is blocked, causing the photoelectric switch to actuate and output a switching control signal, thereby cutting off or connecting the load current to complete a control action. Due to limitations of the overall structure, the detection distance of slot switches is generally only a few centimeters. 2) Through-beam photoelectric sensor: Separating the emitter and the receiver increases the detection distance. A through-beam photoelectric switch consists of one emitter and one receiver, referred to as a through-beam photoelectric switch. The detection distance of through-beam photoelectric switches can reach several meters or even tens of meters. When using a through-beam photoelectric switch, the emitter and receiver are installed on opposite sides of the path through which the detected object passes. When the object passes, it blocks the light path, causing the receiver to actuate and output a switching control signal. 3) Retro-reflective photoelectric switch: The emitter and receiver are housed in the same unit, with a reflector plate installed in front. It utilizes the reflection principle to achieve photoelectric control and is called a retro-reflective (or mirror-reflective) photoelectric switch. Under normal conditions, the light emitted by the emitter is reflected back by the reflector plate and received by the receiver. Once the detected object blocks the light path and the receiver no longer receives light, the photoelectric switch actuates and outputs a switching control signal. 4) Diffuse-reflective photoelectric switch: The detection head of a diffuse-reflective photoelectric switch also contains an emitter and a receiver, but there is no reflector plate in front. Under normal conditions, the receiver does not detect the light emitted by the emitter. During detection, when the object passes, it blocks the light and reflects part of it back. The receiver then detects the light signal and outputs a switching signal.

FONDERIES FRAISSE sensor application cases

1) Application of photoelectric sensors in laser weapons: Since photoelectric sensors are particularly sensitive to infrared radiation, visible light, or both, they are more likely to become targets of laser attacks. In addition, electronic systems and the sensors themselves are highly susceptible to interference from thermal noise and electromagnetic noise generated by lasers, preventing normal operation. Laser weapons on the battlefield mainly attack photoelectric sensors in the following ways: Using a laser beam of appropriate energy to "blind" the sensor, rendering it unable to detect or continue tracking already detected targets. Alternatively, if the sensor is guiding a weapon toward a target, blinding will cause it to lose the target. In summary, since sensors play an increasingly important role on the battlefield and are vulnerable to laser attacks, they have become the preferred target for low-energy laser weapons. 2) Application of photoelectric sensors in automatic meter reading systems: With the development of microelectronics, sensor technology, computer technology, and modern communications, photoelectric sensors can be used to develop automatic meter reading systems. The aluminum disk of an electricity meter rotates under the torque generated by eddy currents and magnetic fields. Using a photoelectric sensor converts the number of rotations of the aluminum disk into pulse counts. For example, by partially blackening a rotating shiny aluminum disk and pairing it with a reflective photoelectric emitter-receiver pair, pulses are generated at the blackened areas as the disk rotates. The rotations of the aluminum disk are sampled and converted into corresponding pulse counts, which are then sent via an optocoupler isolation circuit to the T0 port of the CPU for counting processing. Using optocoupler isolators effectively prevents interference signals from entering the microcomputer. Combined with other transmission methods, this forms an automatic meter reading system. 3) Application of photoelectric sensors in monitoring smoke and dust pollution: A photoelectric sensor is a small electronic device that detects changes in received light intensity and achieves control functions by converting these changes into electrical signals. Due to characteristics such as non-contact operation, fast response, and reliable performance, photoelectric sensors are widely used in industrial automation devices and robotics. We can utilize the characteristics of photoelectric sensors to detect smoke and dust conditions; thus, the strength of the output signal from the photoelectric sensor reflects changes in flue gas turbidity. 4) Hygienic washdown-proof photoelectric sensors: Washdown-proof sensors provide extremely high reliability and comfort while minimizing operating costs. Equipped with IO-Link interfaces and the proTect+ sealing concept, which significantly extends service life, these two new sensors are suitable for demanding application environments and are an ideal solution for the food and beverage industry.

Weidou Intelligent Technology specializes in selling German FONDERIES FRAISSE sensors, FONDERIES FRAISSE proximity sensors, FONDERIES FRAISSE distance sensors, FONDERIES FRAISSE vision sensors, FONDERIES FRAISSE displacement sensors, FONDERIES FRAISSE load cells, FONDERIES FRAISSE speed sensors, FONDERIES FRAISSE photoelectric sensors, FONDERIES FRAISSE position sensors, FONDERIES FRAISSE angle sensors, FONDERIES FRAISSE tactile sensors, FONDERIES FRAISSE temperature sensors, FONDERIES FRAISSE pressure sensors, FONDERIES FRAISSE flow sensors, FONDERIES FRAISSE level sensors, FONDERIES FRAISSE motion sensors, and FONDERIES FRAISSE process sensors. Original imports from Germany. Welcome inquiries and orders from users.