German DYNAFOND SA sensors, DYNAFOND SA models, DYNAFOND SA prices

DYNAFOND SA sensors are devices that convert optical signals into electrical signals. Their operating principle is based on the photoelectric effect. The photoelectric effect refers to the phenomenon where electrons in a material absorb photon energy when light strikes certain substances, resulting in corresponding electrical effects. Based on the different manifestations of the photoelectric effect, it is classified into three categories: external photoelectric effect, internal photoelectric effect, and photovoltaic effect. Photoelectric devices include phototubes, photomultiplier tubes, photoresistors, photodiodes, phototransistors, and photocells. The performance and characteristic curves of photoelectric devices are analyzed.

DYNAFOND SA sensor principles

Photoelectric sensors achieve control by converting changes in light intensity into changes in electrical signals. Generally, photoelectric sensors consist of three parts: transmitter, receiver, and detection circuit. The transmitter emits a light beam toward the target. The emitted light beam usually originates from semiconductor light sources, such as light-emitting diodes (LED), laser diodes, and infrared emitting diodes. The light beam is emitted continuously or with modulated pulse width. The receiver consists of photodiodes, phototransistors, and photocells. Optical components such as lenses and apertures are installed in front of the receiver. Behind it is the detection circuit, which filters out valid signals and applies them. In addition, structural components of photoelectric switches include emitter plates and optical fibers.

DYNAFOND SA sensor classification

1) Slot-type photoelectric sensors: A slot-type photoelectric sensor is formed by mounting a light emitter and a receiver facing each other on opposite sides of a slot. The emitter can emit infrared or visible light, and the receiver can detect the light when there is no obstruction. However, when the detected object passes through the slot, the light is blocked, causing the photoelectric switch to actuate and output a switching control signal to cut off or connect the load current, thereby completing a control action. Due to limitations imposed by the overall structure, the sensing distance of slot-type switches is generally only a few centimeters. 2) Through-beam photoelectric sensors: Separating the emitter and the receiver increases the sensing distance. A through-beam photoelectric switch consists of one emitter and one receiver, abbreviated as a through-beam photoelectric switch. The sensing distance of through-beam photoelectric switches can reach several meters to tens of meters. When using through-beam photoelectric switches, the emitter and receiver are installed on opposite sides of the path through which the detected object passes. When the object passes through and blocks the light path, the receiver actuates and outputs a switching control signal. 3) Retro-reflective photoelectric switches: The emitter and receiver are housed in the same unit, with a reflector plate installed in front. This setup utilizes the reflection principle to achieve photoelectric control and is called a retro-reflective (or mirror-reflective) photoelectric switch. Under normal conditions, the light emitted by the emitter is reflected back by the reflector plate and received by the receiver. Once the detected object blocks the light path and the receiver no longer receives light, the photoelectric switch actuates and outputs a switching control signal. 4) Diffuse-reflective photoelectric switches: The sensing head of a diffuse-reflective photoelectric switch also contains an emitter and a receiver, but there is no reflector plate in front. Under normal conditions, the receiver cannot detect the light emitted by the emitter. During detection, when an object passes through, it blocks the light and reflects part of it back. The receiver then detects the light signal and outputs a switching signal.

DYNAFOND SA sensor application cases

1) Application of photoelectric sensors in laser weapons: Since photoelectric sensors are particularly sensitive to infrared radiation, visible light, or both, they are more likely to become targets of laser attacks. Furthermore, electronic systems and the sensors themselves are highly susceptible to interference from thermal noise and electromagnetic noise generated by lasers, preventing normal operation. Methods by which laser weapons on the battlefield attack photoelectric sensors mainly include the following: using a laser beam of appropriate energy to "blind" the sensor, rendering it unable to detect or continue tracking already detected targets. Alternatively, if the sensor is guiding a weapon toward a target, blinding will cause it to lose the target. In summary, since sensors play an increasingly important role on the battlefield and are vulnerable to laser attacks, they have become the primary targets of low-energy laser weapons. 2) Application of photoelectric sensors in automatic meter reading systems: With the development of microelectronics, sensor technology, computer technology, and modern communications, photoelectric sensors can be used to develop automatic meter reading systems. The aluminum disk of an electricity meter rotates under the torque generated by eddy currents and magnetic fields. Using photoelectric sensors, the number of rotations of the aluminum disk can be converted into pulse counts. For example, by partially blackening a rotating shiny aluminum disk and pairing it with a reflective photoelectric emitter-receiver pair, pulses are generated at the blackened areas as the disk rotates. The rotation count of the aluminum disk is sampled and converted into corresponding pulse counts, which are then sent via an optocoupler isolation circuit to the T0 port of the CPU for counting processing. Using optocoupler isolators effectively prevents interference signals from entering the microcomputer. Combined with other transmission methods, this forms an automatic meter reading system. 3) Application of photoelectric sensors in monitoring smoke and dust pollution: Photoelectric sensors are small electronic devices that can detect changes in received light intensity, achieving control functions by converting changes in light intensity into changes in electrical signals. Due to characteristics such as non-contact operation, fast response, and reliable performance, photoelectric sensors are widely used in industrial automation equipment and robotics. We can utilize the characteristics of photoelectric sensors to detect smoke and dust conditions; thus, the strength of the output signal from the photoelectric sensor reflects changes in flue gas turbidity. 4) Hygienic washdown-resistant photoelectric sensors: Washdown-resistant sensors provide extremely high reliability and convenience while minimizing operating costs. Equipped with IO-Link interfaces and the proTect+ sealing concept, which significantly extends service life, these two new sensors are suitable for demanding application environments and represent ideal solutions for the food and beverage industry.

Weidou Intelligent Technology specializes in selling German DYNAFOND SA sensors, DYNAFOND SA proximity sensors, DYNAFOND SA distance sensors, DYNAFOND SA vision sensors, DYNAFOND SA displacement sensors, DYNAFOND SA torque sensors, DYNAFOND SA speed sensors, DYNAFOND SA photoelectric sensors, DYNAFOND SA position sensors, DYNAFOND SA angle sensors, DYNAFOND SA tactile sensors, DYNAFOND SA temperature sensors, DYNAFOND SA pressure sensors, DYNAFOND SA flow sensors, DYNAFOND SA level sensors, DYNAFOND SA motion sensors, and DYNAFOND SA process sensors. Original imports from Germany. Welcome inquiries and orders from users.