German ZITEC valves ZITEC models ZITEC prices

ZITEC valves use liquid as the working medium to transmit energy and perform control. Hydraulic transmission and pneumatic transmission are collectively referred to as fluid power transmission. This is an emerging technology developed based on the principle of hydrostatic pressure transmission proposed by Pascal in the 18th century, and it is widely used in industrial and agricultural production.

Basic principle of ZITEC valves

The basic principle of hydraulic transmission is to use pressurized oil as the working medium in a sealed container to achieve energy conversion and power transmission. The liquid is called the working medium, generally mineral oil, and its function is similar to that of transmission components such as belts, chains, and gears in mechanical transmission. Hydraulic transmission utilizes Pascal's principle! Pascal's principle is roughly as follows: In a sealed environment, when a force is applied to a liquid, the liquid transmits this force in all directions, and the magnitude of the pressure remains unchanged! P=F/S. Hydraulic transmission uses this physical property to apply a force to an object with a small area, causing an object with a large area to experience a significant force through Pascal's principle, thereby achieving the effect of lifting heavy loads. Hydraulic transmission is also widely used in the valve industry, such as in machine tool manufacturing and processing equipment for valves, hydraulic test equipment for valves, and hydraulic transmission devices for valves.

Advantages and disadvantages of ZITEC valves

Advantages: 1) Small size and light weight, resulting in low inertia; no major impact occurs during sudden overload or stopping; 2) Can smoothly and automatically adjust traction speed within a given range, and achieve stepless speed regulation; 3) Easy reversal; rotation and linear reciprocating motion of the working mechanism can be conveniently converted without changing the motor rotation direction; 4) The hydraulic pump and hydraulic motor are connected by oil pipes, so there are no strict restrictions on spatial arrangement; 5) Since oil is used as the working medium, the relative moving surfaces of components are self-lubricating, resulting in low wear and long service life; 6) Simple operation and control, with a high degree of automation; 7) Overload protection is easy to implement. Disadvantages: 1) Hydraulic transmission has high maintenance requirements; the working oil must always remain clean; 2) High manufacturing precision is required for hydraulic components, the process is complex, and the cost is high; 3) Maintenance of hydraulic components is complex and requires a high level of technical expertise; 4) Using oil as the working medium poses a fire hazard at the working surface; 5) Low transmission efficiency.

ZITEC valve maintenance methods

In the manufacturing process of hydraulic valves, selective assembly is mostly chosen to effectively improve assembly accuracy. That is, for a batch of finished parts, such as valve spools and valve bodies, the most reasonable fit clearance should be selected based on actual dimensions, and then assembled to ensure that the valve spool has good sliding performance and sealing performance. In other words, for hydraulic valves of the same type, there may be certain differences in the mating dimensions between the valve body and the valve spool. In actual use, when there are many failed hydraulic valves in an enterprise, all hydraulic valves can be disassembled and cleaned, each part inspected and measured, parts classified according to the inspection results, and then recombined and selected using certain methods. After inspection, if wear is found on both the valve body and the valve spool, but there are no severe scratches on the working surface or no severe local wear, valve bodies and valve spools with appropriate clearances can be selected for reassembly. If the fit clearance between the valve body and the valve increases compared to the clearance specified in the product drawings, and the increase is between 20% and 25%, certain methods should be adopted to increase the valve spool size, followed by lapping and repair. For conical valve groups, regarding the valve seat and valve spool, if the contact surface sealing in the conical seat valve is poor, grinding is sufficient because the conical valve can automatically compensate for the clearance under spring action. If the wear between the valve body and the valve is uneven or there are scratches on the working surface, and the above methods cannot restore the hydraulic valve function well, the selection of the valve body and valve spool should meet the interference requirements in the machining allowance. The valve body bore should be appropriately reamed, and the valve spool should be appropriately ground, so that the shape accuracy and assembly clearance are reasonable.

Weidou Intelligent Technology professionally sells German ZITEC valves, ZITEC safety valves, ZITEC globe valves, ZITEC control valves, ZITEC solenoid valves, ZITEC ball valves, ZITEC proportional valves, ZITEC diaphragm valves, ZITEC butterfly valves, ZITEC hydraulic transmission valves, ZITEC check valves, ZITEC pressure reducing valves, ZITEC relief valves, ZITEC sequence valves, ZITEC balance valves, ZITEC throttle valves, ZITEC directional control valves. Original imports from Germany. Welcome customers to inquire and order.