German poppelmann valves poppelmann models poppelmann prices

poppelmann valves are globe valves that use a diaphragm as the closing element to seal the flow passage, cut off fluid flow, and separate the valve body cavity from the valve bonnet cavity. Diaphragms are commonly made of elastic, corrosion-resistant, non-permeable materials such as rubber and plastics. Valve bodies are mostly made of plastic, fiberglass, ceramic, or metal with rubber lining. They feature a simple structure, good sealing and anti-corrosion performance, and low fluid resistance. They are used for media with low pressure, low temperature, strong corrosiveness, and suspended solids. Structural types include weir type, globe type, and gate type. Drive methods include manual, pneumatic, and electric.

poppelmann valve functions

A diaphragm valve contains a flexible or composite diaphragm inside the valve body and bonnet, with a compression device connected to the diaphragm serving as the closing element. The valve seat can be weir-shaped or the pipe wall of a straight-through flow passage. The advantage of a diaphragm valve is that the operating mechanism is isolated from the media path, which not only ensures the purity of the working medium but also prevents the medium in the pipeline from impacting the operating components. In addition, no separate sealing is required at the valve stem, unless used as a safety facility for controlling hazardous media. In diaphragm valves, since the working medium contacts only the diaphragm and the valve body, both of which can be made from various different materials, the valve can ideally control a wide range of working media, especially those with chemical corrosiveness or suspended particles. The operating temperature of a diaphragm valve is usually limited by the materials used for the diaphragm and the valve body lining, with an operating temperature range of approximately -50 to 175℃. The diaphragm valve has a simple structure, consisting of only three main components: the valve body, the diaphragm, and the valve head assembly. The valve is easy to disassemble and maintain quickly, and diaphragm replacement can be completed on-site in a short time.

poppelmann valve working principle

Diaphragm valves replace the valve core assembly with a corrosion-resistant lined valve body and a corrosion-resistant diaphragm, using the movement of the diaphragm for regulation. The valve body material of diaphragm valves is cast iron, cast steel, or cast stainless steel, lined with various corrosion-resistant or wear-resistant materials; diaphragm materials include rubber and polytetrafluoroethylene (PTFE). The lined diaphragm has strong corrosion resistance and is suitable for regulating highly corrosive media such as strong acids and strong alkalis. Diaphragm valves have a simple structure, low fluid resistance, and greater flow capacity than other types of valves of the same specification; they are leak-free and can be used for regulating high-viscosity media and media with suspended particles. The diaphragm isolates the medium from the upper chamber of the valve stem, so there is no packing and the medium will not leak out. However, due to limitations of the diaphragm and lining materials, pressure and temperature resistance are relatively poor, generally applicable only to nominal pressures up to 1.6MPa and temperatures below 150℃. The flow characteristic of a diaphragm valve is close to quick-opening; it is approximately linear before 60% travel, and the flow change is not significant after 60%. Pneumatic diaphragm valves can be equipped with feedback signals, limiters, and positioners to meet the needs of automatic control, program control, or flow regulation. The feedback signal of pneumatic diaphragm valves uses non-contact sensing technology. This product uses a diaphragm-type actuating cylinder instead of a piston cylinder, eliminating the drawback of piston rings being easily damaged, causing leakage and preventing the valve from opening or closing. In case of air source failure, the handwheel can still be operated to open or close the valve.

poppelmann valve application scenarios

A diaphragm valve is a special type of shut-off valve whose closing element is a diaphragm made of soft material, which separates the valve body cavity from the valve bonnet cavity. Due to limitations in valve body lining processes and diaphragm manufacturing processes, it is difficult to produce larger valve body linings and larger diaphragms. Therefore, diaphragm valves are not suitable for larger pipe diameters and are generally applied in pipelines ≤DN200. Due to limitations of diaphragm materials, diaphragm valves are suitable for low-pressure and low-temperature applications. Generally, the temperature should not exceed 180℃. Since diaphragm valves have good anti-corrosion performance, they are mostly used in devices and pipelines for corrosive media. The applicable temperature and medium for diaphragm valves are limited by the valve body lining material and the diaphragm material.

Weidou Intelligent Technology specializes in selling German poppelmann valves, poppelmann safety valves, poppelmann globe valves, poppelmann control valves, poppelmann solenoid valves, poppelmann ball valves, poppelmann proportional valves, poppelmann diaphragm valves, poppelmann butterfly valves, poppelmann hydraulic transmission valves, poppelmann check valves, poppelmann pressure reducing valves, poppelmann relief valves, poppelmann sequence valves, poppelmann balance valves, poppelmann throttle valves, poppelmann directional control valves. Original imports from Germany. Welcome customers to inquire and order.