German LERBS valve LERBS model LERBS price

LERBS valves serve an on/off function. They are commonly installed at the inlets and outlets of cold and heat sources, at equipment inlets and outlets, and on pipeline branches (including risers); they can also be used as drain valves and air vent valves. Common shut-off valves include gate valves, globe valves, ball valves, and butterfly valves. Gate valves can be classified by rising or non-rising stem, single or double gate, and wedge or parallel gate designs. Gate valves do not provide tight shutoff, and large-diameter gate valves are difficult to open; the valve body is compact along the flow direction, resulting in low flow resistance, and gate valves cover a wide range of nominal diameters. Globe valves are categorized by media flow direction into straight-through, angle, and Y-pattern types, with rising or non-rising stem variants. Globe valves provide tighter shutoff than gate valves, have longer valve bodies, higher flow resistance, and a maximum nominal diameter of DN200. The ball valve core is a perforated sphere. Rotating the stem to align the bore with the pipe axis yields full open; rotating 90° yields full closed. Ball valves offer some throttling capability and tighter shutoff. The butterfly valve core is a circular disc that rotates about an axis perpendicular to the pipe axis. When the disc plane is aligned with the pipe axis, the valve is fully open; when the disc plane is perpendicular to the pipe axis, the valve is fully closed. Butterfly valves have short body lengths and low flow resistance, and are priced higher than gate and globe valves. The butterfly valve core is a circular disc that rotates about an axis perpendicular to the pipe axis. When the disc plane is aligned with the pipe axis, the valve is fully open; when the disc plane is perpendicular to the pipe axis, the valve is fully closed. Butterfly valves have short body lengths and low flow resistance, and are priced higher than gate and globe valves.

LERBS valve accessories

Valves and fittings are used for pipeline connections or control systems. Valves and fittings cannot exist independently; they are complementary. Valve fittings are available in carbon steel and stainless steel, as well as PVC, or other materials; the first two are the most common. In recent years, rising living standards have increased demand for processed foods, driving rapid development in food machinery. As a result, the production of sanitary stainless steel valve fittings has flourished. When people refer to valve fittings, they mostly mean sanitary stainless steel types.

LERBS valve specification considerations

Acceptance follows HG 20202-2000 "Code for Construction and Acceptance of Degreasing Engineering." Before assembly, each component is wiped with clean precision filter paper; selection of dead corners on components is required, and no color change on the filter paper indicates compliance. 1) The valve model shall indicate the applicable national standard number. If an enterprise standard applies, relevant model descriptions shall be provided. 2) The valve working pressure shall be ≥ the pipeline working pressure; without affecting price, the valve's allowable working pressure should exceed the actual pipeline working pressure. 3) Valve manufacturing standards shall specify the applicable national standard number; if an enterprise standard applies, enterprise documentation shall be attached to the procurement contract.

LERBS valve common faults

In continuous service, rubber elastomers in butterfly valves may experience tearing, wear, aging, perforation, or even detachment. Traditional hot vulcanization processes are ill-suited for on-site repair, requiring specialized equipment and consuming significant thermal and electrical energy, which is time-consuming and labor-intensive. Nowadays, polymer composite material methods are gradually replacing traditional methods, with the FoShiLan technology system being the most widely applied. Its products offer superior adhesion and excellent wear and tear resistance, ensuring that repaired components meet or even exceed the service life of new parts, significantly reducing downtime.

Weidou Intelligent Technology specializes in selling German LERBS valves, LERBS safety valves, LERBS globe valves, LERBS control valves, LERBS solenoid valves, LERBS ball valves, LERBS proportional valves, LERBS diaphragm valves, LERBS butterfly valves, LERBS hydraulic actuated valves, LERBS check valves, LERBS pressure reducing valves, LERBS relief valves, LERBS sequence valves, LERBS balance valves, LERBS throttle valves, LERBS directional control valves, all original imports from Germany. We welcome inquiries and orders from customers.