German castelein sealants valves, castelein sealants models, castelein sealants prices

castelein sealants valves are an important component of the safety system for thermal power plant units. They are critical safety devices that ensure the safe operation of extraction steam units and prevent turbine overspeed accidents caused by steam backflow in extraction pipelines. To this end, Article 8.1.10 of the "Twenty-Five Key Requirements for Preventing Major Accidents in Power Production" issued by the State Power Corporation specifically emphasizes that "the adjustable extraction steam check valves of extraction steam units shall be tight, with reliable interlock action, and extraction steam stop valves capable of rapid closure must be installed to prevent overspeed caused by extraction steam backflow." Currently, the safety measure adopted by extraction steam units to prevent overspeed due to steam backflow is the installation of check valves on the extraction pipelines. However, the currently applied extraction steam check valves have defects such as slow closing response, incomplete sealing, poor reliability, and inability to effectively prevent steam backflow. These defects have previously caused several major accidents involving serious overspeed due to extraction steam backflow, posing significant hidden dangers to production safety. Therefore, it is highly necessary to install a new type of faster-closing valve that is safer and more reliable on this pipeline to effectively prevent accidents and substantially improve the safety performance of the unit.

castelein sealants valve structure

It consists of four parts: hydraulic actuator, mechanical conversion mechanism, triple-offset butterfly valve, and electrical control system. 1) Hydraulic Actuator The hydraulic actuator comprises an integrated hydraulic control system, including a power oil source, accumulator, control valve block, and hydraulic cylinder. The output of the actuator's hydraulic cylinder is linear motion. The cylinder piston is connected via threads to the rack of the mechanical conversion mechanism. 2) Mechanical Conversion Mechanism The mechanical conversion mechanism consists of a rack and a gear transmission mechanism. It converts the linear output of the hydraulic cylinder into angular output. The mechanical conversion mechanism is connected to the valve body via a flange. Its gears are directly linked to the drive of the butterfly valve, driving the valve disc to perform various actions, thereby enabling the actuator to control the butterfly valve and achieve functions such as rapid closure. 3) Valve The valve offers excellent tightness, zero leakage, no sticking, long service life, and low torque. To ensure the safety and reliability of valve operation, the valve paired with the electro-hydraulic control rapid shut-off device should be a high-quality triple-offset metal-sealed butterfly valve. Various imported and domestic valves are available. 4) Electrical Control System The electrical control section consists of an operation unit, controller, and display and alarm unit. The operation unit supports automatic, manual, remote, and local operation modes. In automatic mode, it receives protection signals such as turbine main steam valve closure or oil circuit breaker tripping to implement rapid valve closure. Manual remote operation can be performed from the control room to execute rapid closure, normal opening and closing, and valve activity tests. A manual local operation mode with the same functions as manual remote operation is provided to facilitate adjustment tests and emergency handling in accident situations. The controller receives information from the operation unit, performs logical judgments, outputs function commands, and controls solenoid valves to achieve various control functions. The solenoid valves are normally de-energized and operate when energized. The controller also receives system oil pressure signals to control the start and stop of the oil pump, maintaining constant pressure in the oil system. The display and alarm unit provides status indications for valve "Open," "Closed," "Activity Test," and "Rapid Closure." It also monitors and alarms for faults such as low oil system pressure, low oil tank level, low accumulator air pressure, and motor overheating.

castelein sealants valve functions

1) Slow Opening/Closing When PLC receives a slow opening/closing signal, it sends pulse commands to the stepper motor, causing the motor to rotate in the corresponding direction. This directs high-pressure oil into the right or left side of the double-acting cylinder, driving the gears and valve to move in the opening or closing direction. Upon receiving signals indicating the fully open or fully closed position, PLC continues to send commands for a period to ensure the valve reaches the fully open or fully closed position. 2) Position Holding When PLC does not receive any commands, the motor, pump, and gears remain stationary. Since the hydraulic components in the equipment are leak-free, the valve maintains its position in this state. 3) Rapid Closure When PLC receives a rapid closure signal, PLC energizes the rapid closure solenoid valve. This connects the two chambers of the double-acting cylinder to relieve oil pressure. Under the action of the rapid closure spring, the valve quickly moves to the fully closed position. 4) Buffering To reduce impact during rapid closure, variable throttling buffering is added to the double-acting cylinder when the valve closes to 10% of its travel. 5) Status Display and Alarm Displays working statuses such as valve "Open," "Closed," and "Rapid Closure." It also monitors and alarms for faults such as "Actuator Error" and "Excessive Valve Opening/Closing Time." Working Principle: The electro-hydraulic control rapid shut-off valve consists of an electrical control device, actuator, and valve. Control signals are output as control commands by the controller, driving the valve action via the hydraulic actuator to achieve various control functions.

castelein sealants valve working principle

The electro-hydraulic control rapid shut-off valve consists of an electrical control device, actuator, and valve. Control signals are output as control commands by the controller, driving the valve action via the hydraulic actuator to achieve various control functions.

Weidou Intelligent Technology specializes in selling German castelein sealants valves, castelein sealants safety valves, castelein sealants stop valves, castelein sealants control valves, castelein sealants solenoid valves, castelein sealants ball valves, castelein sealants proportional valves, castelein sealants diaphragm valves, castelein sealants butterfly valves, castelein sealants hydraulic transmission valves, castelein sealants check valves, castelein sealants pressure reducing valves, castelein sealants relief valves, castelein sealants sequence valves, castelein sealants balance valves, castelein sealants throttle valves, and castelein sealants directional control valves. Original imports from Germany. Customers are welcome to inquire and place orders.