German BERNARD valves BERNARD models BERNARD prices

BERNARD valves are used to prevent backflow of media, opening automatically using the kinetic energy of the fluid itself and closing automatically during reverse flow. They are commonly installed at pump outlets, steam trap outlets, and other locations where reverse fluid flow is not permitted. Check valves are classified into swing type, lift type, and wafer type. For swing check valves, fluid can only flow from left to right, and they close automatically during reverse flow. For lift check valves, when fluid flows from left to right, the valve core lifts to form a passage; during reverse flow, the valve core is pressed against the valve seat and closed. For wafer check valves, when fluid flows from left to right, the valve core opens to form a passage; during reverse flow, the valve core is pressed against the valve seat and closed. Wafer check valves allow multi-position installation, have small volume, light weight, and compact structure.

BERNARD valve industry applications

Ball valves are widely used in oil refining, long-distance pipelines, chemical industry, papermaking, pharmaceuticals, water conservancy, electric power, municipal engineering, steel, and other industries, occupying a pivotal position in the national economy. It has a rotating action of 90 degrees, with a spherical plug body featuring a circular through-hole or channel along its axis. Ball valves are mainly used in pipelines for shut-off, distribution, and changing the flow direction of media. They require only a 90-degree rotation operation and very small torque to achieve tight shut-off. Ball valves are most suitable for use as on/off and shut-off valves, V type ball valve. In addition to paying attention to pipeline parameters, special attention should be paid to the environmental conditions for electric valves, as the electric actuator in an electric valve is an electromechanical device whose operating status is greatly affected by the environment. Typically, special attention is required when using electric ball valves and butterfly valves in the following environments. [1]

BERNARD valve performance testing precautions

1) When valves of a specific specification are manufactured in batches, an official agency should be commissioned to perform the following performance tests: (1) Opening and closing torque of the valve under working pressure conditions; (2) Testing of the flow resistance coefficient of the valve under pipeline water transmission conditions. 2) The following tests should be performed on valves before factory shipment: (1) With the valve in the open position, the valve body shall withstand an internal pressure test at twice the valve's working pressure; (2) With the valve in the closed position, both sides shall separately withstand 11 times the valve's working pressure without leakage; however, for metal-sealed butterfly valves, the leakage value shall not exceed relevant requirements.

BERNARD valve installation instructions

Butterfly valves have a simple structure, small volume, and light weight, with relatively few components; just a few key parts constitute the butterfly valve. Operation is very convenient, requiring only turning the switch to ninety degrees. Butterfly valves provide excellent control over fluid flow, allowing flow rate to be increased or decreased at any time. Valves always present some resistance when transporting any fluid, and the resistance of a butterfly valve mainly comes from itself, such as the thickness of the butterfly valve body. To reduce fluid resistance, one only needs to reduce its thickness. Elastic seals have the disadvantage of being limited by temperature. The application range of butterfly valves is also quite wide. If used for flow control, different types and valve body sizes need to be selected, as butterfly valves are inherently suitable for larger nominal diameters during design. Butterfly valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but are also applied in cooling water systems of thermal power stations.

Weidou Intelligent Technology specializes in selling German BERNARD valves, BERNARD safety valves, BERNARD globe valves, BERNARD control valves, BERNARD solenoid valves, BERNARD ball valves, BERNARD proportional valves, BERNARD diaphragm valves, BERNARD butterfly valves, BERNARD hydraulic actuated valves, BERNARD check valves, BERNARD pressure reducing valves, BERNARD relief valves, BERNARD sequence valves, BERNARD balance valves, BERNARD throttle valves, BERNARD directional control valves, original imports from Germany. Welcome customers to inquire and order.