German Armatury Group valves, Armatury Group models, Armatury Group prices

With a constant pressure differential across the Armatury Group valve, the flow rate of a standard valve changes little when the opening varies over a wide range. However, at a certain opening, the flow rate changes sharply, indicating poor regulation performance. A control valve adjusts the valve core stroke according to the direction and magnitude of the signal, thereby changing the valve's resistance coefficient to achieve flow regulation. Control valves are divided into manual and automatic types. Both manual and automatic control valves come in various types with different regulation performances. Automatic control valves include self-operated flow control valves and self-operated differential pressure control valves.

Armatury Group valve connection method: threaded connection

This is a simple connection method, commonly used for small valves. It is divided into two cases: 1) Direct sealing: internal and external threads provide the sealing directly. To ensure no leakage at the connection, lead oil, hemp, and PTFE raw tape are often used as fillers; among these, PTFE raw tape is increasingly widely used. This material has excellent corrosion resistance, provides superior sealing, and is convenient to use and store. During disassembly, it can be removed intact because it is a non-adhesive film, making it far superior to lead oil and hemp. 2) Indirect sealing: the tightening force of the thread is transmitted to the gasket between the two planes, allowing the gasket to provide the sealing.

Armatury Group valve sealing requirements

The sealing performance of a valve refers to the ability of its sealing parts to prevent medium leakage. It is the most important technical performance indicator of a valve. There are three sealing locations in a valve: the contact area between the sealing surfaces of the closing member and the valve seat; the mating area between the packing, the valve stem, and the packing box; and the connection area between the valve body and the valve cover. Leakage at the first location is called internal leakage, commonly referred to as incomplete closure, which affects the valve's ability to cut off the medium. For shut-off valves, internal leakage is not permitted. Leakage at the latter two locations is called external leakage, where the medium leaks from inside the valve to the outside. External leakage causes material loss, environmental pollution, and can even lead to accidents in severe cases. For flammable, explosive, toxic, or radioactive media, external leakage is strictly prohibited; therefore, valves must have reliable sealing performance.

Armatury Group valve advantages

The electric ball valve structure consists of only a few components, saving material usage; it features a small volume, light weight, and compact installation dimensions. As shown in the electric ball valve structure diagram, it requires low driving torque. For pressure regulating valves, operation is simple and agile, requiring only a 90° rotation for quick opening and closing. It also offers good flow regulation efficiency and tight sealing characteristics. In applications involving large to medium diameters and medium to low pressures, the electric ball valve is the dominant valve type. When the electric ball valve is fully open, the disc thickness is the resistance to the medium flowing through the valve body, resulting in a very small pressure drop and thus good flow control characteristics. Electric ball valves have two sealing types: elastic sealing and metal sealing. For elastic sealing valves, the sealing ring can be embedded in the valve body or attached to the periphery of the disc. Valves with metal sealing generally have a longer service life than those with elastic sealing, but it is difficult to achieve complete sealing. Metal sealing can adapt to higher operating temperatures, whereas elastic sealing has the disadvantage of being limited by temperature. If an electric ball valve is required for flow control, it is important to accurately select the valve size and type. The structural principle of the electric ball valve is particularly suitable for manufacturing large-diameter valves. Electric ball valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but also in the cooling water systems of thermal power stations. Common electric ball valves include wafer-type and flanged types. Wafer-type electric ball valves are connected between two pipe flanges using double-headed bolts. Flanged electric ball valves have flanges on the valve, which are bolted to the pipe flanges at both ends. The strength performance of a valve refers to its ability to withstand medium pressure. As a mechanical product subjected to internal pressure, a valve must have sufficient strength and rigidity to ensure long-term use without rupture or deformation. A pneumatic ball valve consists of a ball valve equipped with a pneumatic actuator. Pneumatic actuators are divided into double-acting and single-acting types. Controlled by solenoid valves, they realize the switching action of the ball valve. Pneumatic ball valves enable intelligent control, rapid opening or closing of pipelines, and effective control and management of the pipeline network.

Weidou Intelligent Technology specializes in selling German Armatury Group valves, Armatury Group safety valves, Armatury Group globe valves, Armatury Group control valves, Armatury Group solenoid valves, Armatury Group ball valves, Armatury Group proportional valves, Armatury Group diaphragm valves, Armatury Group butterfly valves, Armatury Group hydraulic transmission valves, Armatury Group check valves, Armatury Group pressure reducing valves, Armatury Group relief valves, Armatury Group sequence valves, Armatury Group balance valves, Armatury Group throttle valves, Armatury Group directional control valves. Original imports from Germany. Welcome inquiries and orders from customers.