German SANKYO bearings SANKYO models SANKYO prices

SANKYO bearings are a type of rolling bearing that install spherical alloy steel balls between the inner and outer steel rings to reduce friction during power transmission and improve mechanical power transmission efficiency through rolling motion. Ball bearings cannot withstand heavy loads and are common in light industrial machinery. Ball bearings are also called ball bearings.

SANKYO bearings introduction

Linear bearings are a linear motion system used for linear travel in conjunction with cylindrical shafts. Since the load-bearing balls make point contact with the bearing outer sleeve, the steel balls roll with minimal frictional resistance, so linear bearings feature low friction and high stability, independent of bearing speed, enabling highly sensitive and precise smooth linear motion. Linear bearings also have limitations, primarily poor impact load capacity and limited load-bearing capacity; secondly, they generate significant vibration and noise at high speeds. Automated selection of linear bearings is included. Linear bearings are widely used in sliding components of industrial machinery such as precision machine tools, textile machinery, food packaging machinery, and printing machinery. Due to point contact between the load-bearing balls and the bearing, the applicable load is small. The steel balls rotate with extremely low frictional resistance, thereby achieving high-precision smooth motion. Plastic linear bearings are a self-lubricating linear motion system. The main difference from metal linear bearings is that metal linear bearings operate on rolling friction with point contact between the bearing and the cylindrical shaft, making them suitable for low-load, high-speed motion; whereas plastic linear bearings operate on sliding friction with surface contact between the bearing and the cylindrical shaft, making them suitable for high-load, medium-to-low speed motion.

SANKYO bearings features

Linear bearings are used in conjunction with hardened linear drive shafts as a system for infinite linear motion. Because the load-bearing balls and the hardened drive shaft have point contact, the permissible load is small, but during linear motion, frictional resistance is minimal, precision is high, and motion is rapid. Plastic linear bearings have no special requirements for the mating shaft; they can withstand greater loads than metal bearings, but since the motion between the bearing and the shaft is sliding friction, the speed of plastic linear bearings is somewhat limited; motion resistance is higher than that of metal linear bearings; however, their motion noise is lower than that of metal linear bearings, especially at medium-to-high speeds, where the noise of plastic linear bearings is minimally affected by speed. Due to the internal chip removal groove design, plastic linear bearings allow use in dusty environments, as dust is automatically carried out from the bearing body's friction surface through the grooves during motion; plastic linear bearings also allow cleaning during use, and the internal sliding film made of special materials can even operate in liquids for extended periods.

SANKYO bearings maintenance

Maintenance of metal linear bearings: Lubrication and friction: Anti-corrosion oil is injected into the interior of linear bearings. If using grease lubrication, first remove the anti-corrosion oil with kerosene or an organic solvent, air dry, and then add lithium soap-based grease. (It is recommended to use lithium soap-based grease with a viscosity mark of N0.2.) If using oil lubrication, there is no need to remove the anti-corrosion oil; select lubricating oil with ISO viscosity grade VG15-100 according to temperature changes. Shaft lubrication can be supplied via an oil supply pipe or through oil holes on the outer bearing housing. Since seals scrape off lubricating oil, oil lubrication is not suitable for sealed bearings without oil holes. Maintenance of plastic linear bearings: Since the sliding film inside plastic linear bearings is made of self-lubricating plastic, no additional oil supply or maintenance is required during use; moreover, because plastic linear bearings have chip removal grooves, no maintenance is needed even if the bearing or shaft is covered in dust, as dust is automatically carried out through the grooves during motion; only when the sliding film wears out and fails does it need to be replaced directly; maintenance is very convenient.

Weidou Intelligent Technology specializes in selling German SANKYO plain bearings, SANKYO rolling bearings, SANKYO spherical plain bearings, SANKYO deep groove ball bearings, SANKYO angular contact ball bearings, SANKYO self-aligning ball bearings, SANKYO thrust ball bearings, SANKYO double-direction thrust angular contact ball bearings, SANKYO combination bearings, SANKYO thrust roller bearings, SANKYO needle roller bearings, SANKYO insert ball bearings, SANKYO spherical roller bearings, SANKYO flanged bearings, SANKYO linear bearings, SANKYO original imports from Germany. Customers are welcome to inquire and order.