German KUKKO bearings KUKKO models KUKKO prices

KUKKO bearings are a type of rolling bearing and are widely used components in modern machinery. They support rotating parts through rolling contact between the main elements. Roller bearings are now largely standardized. Roller bearings offer advantages such as low starting torque, high rotational accuracy, and ease of selection. Rolling bearings are classified into ball bearings and roller bearings based on the rolling elements. Roller bearings support rotating parts through rolling contact between the main components. Different roller bearings can withstand different radial and axial loads. When selecting roller bearings, the choice should be made according to specific operating conditions. The main structural types of roller bearings include self-aligning roller bearings, thrust self-aligning roller bearings, tapered roller bearings, and cylindrical roller bearings.

KUKKO Bearing Introduction

Linear bearings are linear motion systems used in conjunction with linear strokes and cylindrical shafts. Since the load-bearing balls have point contact with the bearing outer sleeve, the steel balls roll with minimal friction resistance. Therefore, linear bearings feature low friction, stable operation that does not vary with bearing speed, and enable smooth linear motion with high sensitivity and precision. Linear bearings also have limitations, primarily poor impact load capacity and limited load-carrying capacity. Secondly, linear bearings generate significant vibration and noise during high-speed motion. Automated selection of linear bearings is included. Linear bearings are widely used in sliding components of industrial machinery such as precision machine tools, textile machinery, food packaging machinery, and printing machinery. Due to the point contact between the load-bearing balls and the bearing, the applicable load is small. The steel balls rotate with extremely low friction resistance, thereby achieving high-precision smooth motion. Plastic linear bearings are linear motion systems with self-lubricating characteristics. The biggest difference from metal linear bearings is that metal linear bearings operate on rolling friction with point contact between the bearing and the cylindrical shaft, making them suitable for low-load, high-speed motion; whereas plastic linear bearings operate on sliding friction with surface contact between the bearing and the shaft, making them suitable for high-load, medium-to-low speed motion.

KUKKO Bearing Features

Linear bearings are used in conjunction with hardened linear drive shafts as systems for infinite linear motion. Because the load-bearing balls and the hardened drive shaft have point contact, the permissible load is small, but during linear motion, friction resistance is minimal, precision is high, and movement is fast. Plastic linear bearings have no special requirements for the mating shaft; they can withstand greater loads than metal bearings, but since the motion between the bearing and the shaft is sliding friction, the speed of plastic linear bearings is somewhat limited; motion resistance is higher than that of metal linear bearings; however, their motion noise is lower than that of metal linear bearings, especially at medium-to-high speeds, where the noise of plastic linear bearings is very minimally affected by speed. Due to the internal chip removal groove design, plastic linear bearings are allowed for use in dusty environments, as dust is automatically carried out from the bearing body friction surface through the grooves during motion; plastic linear bearings also allow cleaning during use, and the internal sliding film made of special materials can even operate in liquids for extended periods.

KUKKO Bearing Maintenance

Maintenance of metal linear bearings: Lubrication and friction: Anti-corrosion oil is injected into the interior of linear bearings. If using grease lubrication, first remove the anti-corrosion oil with kerosene or an organic solvent, air dry, and then add lubricating grease. (It is recommended to use lithium soap-based grease with a viscosity mark of N0.2.) If using oil lubrication, there is no need to remove the anti-corrosion oil; lubricating oil with ISO viscosity grade VG15-100 can be selected according to temperature changes. Shaft lubrication can be supplied via an oil supply pipe or through oil holes on the external bearing housing. Since seals will scrape off lubricating oil, oil lubrication is not suitable for sealed bearings without oil holes. Maintenance of plastic linear bearings: Since the sliding film inside plastic linear bearings is made of self-lubricating plastic, no additional oil supply or maintenance is required during use; moreover, because plastic linear bearings have chip removal grooves, no maintenance is needed even if the bearing or shaft is clogged with dust, as dust is automatically carried out through the grooves during motion; only when the sliding film wears out and fails is it necessary to directly replace the internal sliding film; maintenance is very convenient.

Weidou Intelligent Technology specializes in selling German KUKKO plain bearings, KUKKO rolling bearings, KUKKO spherical plain bearings, KUKKO deep groove ball bearings, KUKKO angular contact ball bearings, KUKKO self-aligning ball bearings, KUKKO thrust ball bearings, KUKKO double-direction thrust angular contact ball bearings, KUKKO combination bearings, KUKKO thrust roller bearings, KUKKO needle roller bearings, KUKKO insert ball bearings, KUKKO self-aligning roller bearings, KUKKO flanged bearings, KUKKO linear bearings, KUKKO original German imports. Customers are welcome to inquire and order.