Germany Mahr shaft Mahr model Mahr price

The Mahr shaft is a shaft with very low rigidity, elastic and freely bendable for transmission. It is used to connect two shafts with different axes, not in the same direction, or with relative motion to transmit rotational motion and torque. It can flexibly transmit rotational motion and torque to any position. A wire bundle consisting of 4 to 5 layers of steel wires spirally wound on a central steel wire, with adjacent layers having opposite lay directions. It has a structure similar to single-strand wire rope, but with a very small lay pitch and a very large lay angle, and the outer layer of wires is mostly right-hand lay.

Mahr shaft applications

Flexible shafts are named after their use. In mechanical design, they are used as transmission components for non-linear transmission or between non-coplanar planes. They can simplify transmission machinery while offering high transmission accuracy. They are widely used in various sectors, such as concrete vibrators, pneumatic picks, marine water pumps, medical instruments, machine tool transmission devices, and automotive odometers, all of which can be driven by flexible shafts. Additionally, flexible shafts can cushion shocks.

Mahr shaft advantages

Motorized spindles offer advantages such as compact structure, light weight, low inertia, low noise, and fast response. They also feature high speed and high power, simplify machine tool design, and facilitate spindle positioning, making them an ideal structure for high-speed spindle units. Motorized spindle bearings utilize high-speed bearing technology, are wear-resistant and heat-resistant, and have a service life several times that of traditional bearings.

Mahr shaft maintenance

1) After daily work, operators must use a vacuum cleaner to remove debris from the rotor end of the motorized spindle and the motor terminal blocks to prevent accumulation. This avoids debris entering the bearings, which accelerates wear of high-speed bearings, and prevents debris from entering the terminal blocks, which could cause motor short circuits and burnout. 2) When changing tools on the motorized spindle, operators must unscrew the collet chuck cap; direct plug-in/pull-out tool changing methods must not be used! Operators should develop the habit of cleaning the collet and cap thoroughly after tool removal. 3) After powering on each day, operators must check the cooling water flow status of the motorized spindle. Check whether the water pump is working properly, whether the cooling water is contaminated with scale or microorganisms, and whether the piping condition is normal. Normal circulation of cooling water must be ensured! It is strictly prohibited to start the motorized spindle without cooling water flowing through it. The motorized spindle can only operate in good condition under proper cooling. If water pipes have dead bends causing poor flow or are blocked by dirt, the motorized spindle will fail to work properly, affecting machining results.

Weidou Intelligent Technology specializes in selling German Mahr rotating shafts, Mahr mandrels, Mahr drive shafts, Mahr crankshafts, Mahr straight shafts, Mahr flexible shafts, Mahr solid shafts, Mahr hollow shafts, Mahr rigid shafts, Mahr flexible shafts, Mahr polished shafts, Mahr stepped shafts, Mahr spindles, Mahr rotating mandrels, Mahr fixed mandrels, Mahr original imports from Germany. Welcome inquiries and orders from users.