German RIETSOHLE pump RIETSOHLE model RIETSOHLE price

RIETSOHLE pumps are an important component in hydraulic systems. They rely on the reciprocating motion of plungers within the cylinder block to change the volume of the sealed working chamber, thereby achieving oil suction and discharge. Plunger pumps offer advantages such as high rated pressure, compact structure, high efficiency, and convenient flow regulation. Plunger pumps are widely used in applications requiring high pressure, large flow rates, and flow adjustment, such as hydraulic presses, construction machinery, and ships.

RIETSOHLE pump classification

Plunger pumps are generally classified into single-plunger pumps, horizontal plunger pumps, axial plunger pumps, and radial plunger pumps. 1) Single-plunger pump: The main structural components include an eccentric cam, plunger, spring, cylinder block, and two check valves. A sealed volume is formed between the plunger and the cylinder bore. One rotation of the eccentric cam causes the plunger to reciprocate once; downward motion draws in oil, and upward motion discharges oil. The volume of oil discharged per revolution of the pump is called the displacement, which depends only on the pump's structural parameters. 2) Horizontal plunger pump: Horizontal plunger pumps consist of several plungers (typically 3 or 6) installed in parallel. A 1 crankshaft drives the plungers in reciprocating motion via connecting rod sliders or directly via an eccentric shaft, achieving liquid suction and discharge. These pumps also use valve-type distribution devices and are mostly fixed-displacement pumps. Emulsion pumps in coal mine hydraulic support systems are generally horizontal plunger pumps. Emulsion pumps are used at coal mining faces to supply emulsion to hydraulic supports. Their operating principle relies on the rotation of the crankshaft to drive the Piston in reciprocating motion, achieving liquid suction and discharge. 3) Axial type: Axial Piston pump (English name: Piston pump) are plunger pumps where the reciprocating motion direction of the piston or plunger is parallel to the central axis of the cylinder block. Axial plunger pumps operate by utilizing the volume change generated by the reciprocating motion of plungers parallel to the drive shaft within the plunger bores. Since both the plunger and the plunger bore are circular components, they can achieve high-precision mating, resulting in high volumetric efficiency. 4) Straight-axis swashplate type: Straight-axis swashplate plunger pumps are divided into pressure-supply type and self-priming type. Pressure-supply hydraulic pumps mostly use pressurized tanks. For hydraulic tanks relying on air pressure for supply, the machine must only be operated after the hydraulic tank reaches the required operating pressure following each startup. Starting the machine when the hydraulic tank pressure is insufficient can cause detachment of the slipper shoes within the hydraulic pump, leading to abnormal wear between the return plate and the pressure plate inside the pump body. 5) Radial type: Radial plunger pumps can be categorized into valve-distributed and shaft-distributed types. Valve-distributed radial plunger pumps have disadvantages such as high failure rates and low efficiency. Shaft-distributed radial plunger pumps developed in the 70s and 80s internationally overcame the shortcomings of valve-distributed radial plunger pumps. Due to the structural characteristics of radial pumps, shaft-distributed radial plunger pumps are more impact-resistant, have longer service lives, and offer higher control precision than axial plunger pumps. For pumps with short variable strokes, displacement variation is achieved by changing the eccentricity of the stator under the action of the variable plunger and limit plunger. The maximum eccentricity of the stator is 5–9mm (depending on the displacement size), resulting in a very short variable stroke. Furthermore, the variable mechanism is designed for high-pressure operation and controlled by a control valve, giving the pump a fast response speed. The radial structural design overcomes issues such as uneven slipper shoe wear found in axial plunger pumps, significantly improving impact resistance. 6) Hydraulic type: Hydraulic plunger pumps rely on pressurized hydraulic tanks. After each machine startup, operation must only commence once the hydraulic tank reaches the required operating pressure. Straight-axis swashplate plunger pumps are divided into pressure-supply type and self-priming type. Pressure-supply hydraulic pumps mostly use pressurized tanks, though some hydraulic pumps have built-in boost pumps to supply pressure oil to the inlet. Self-priming hydraulic pumps have strong self-priming capabilities and do not require external oil supply.

RIETSOHLE pump operating mode

During operation, the cam on the injection pump camshaft and the plunger spring force the plunger to reciprocate up and down, thereby completing the pumping task. The pumping process can be divided into the following three stages. Conclusion: From the above discussion, the following conclusions are drawn: (1) The total stroke L of the plunger reciprocating motion is constant and determined by the cam lift. (2) The fuel supply quantity per plunger cycle depends on the supply stroke; the supply stroke is not controlled by the camshaft and is variable. (3) The start timing of fuel supply does not change with variations in the supply stroke. (4) Rotating the plunger changes the end timing of fuel supply, thereby altering the fuel supply quantity. 3. Domestic series plunger injection pumps: Domestic series plunger pumps mainly include the A, B, P, Z, and No. I, II, III series. Standardization is based on different fuel supply requirements according to the single-cylinder power range of diesel engines. Using plunger stroke, pump cylinder center distance, and structural type as the basis, different plunger diameters are paired to form several injection pumps with varying fuel supply quantities within one working cycle, meeting the needs of various diesel engines. The operating principles and structural types of domestic series injection pumps are basically the same. Taking the A type pump as an example, the construction and operating principle of plunger injection pumps are introduced. The plunger pump consists of four main parts: the pumping element, fuel quantity adjustment mechanism, drive mechanism, and pump body. It features microprocessor intelligent control, LCD display, and communication with computers, offering stable working pressure, low pulsation, and easy operation. It is widely used in biochemistry, pharmaceutical, chemical, environmental protection, and other industries, meeting the requirements for continuous constant-pressure and constant-flow liquid transport in these sectors.

RIETSOHLE pump maintenance

(1) Inspect the plunger for scratches and corrosion; replace with new parts if necessary. (2) Check the mating condition of the plunger assembly. Insert the plunger end into the plunger sleeve and tilt it approximately 60°. If the plunger slides down slowly under its own weight, the mating is good. (3) Check the sealing of the plunger assembly. Hold the plunger sleeve with one hand, blocking the plunger top and side oil inlet with two fingers. Pull out the plunger with the other hand; significant suction should be felt. If the plunger immediately retracts to its original position upon release, the plunger assembly sealing is good; otherwise, replace the plunger assembly. (4) Inspect the decompression band of the delivery valve assembly for wear, steps, or scratches; replace if necessary. (5) Check the mating condition of the delivery valve assembly. Block the lower hole of the delivery valve with one finger and gently press the delivery valve downward with another finger. When the finger is removed from the top of the delivery valve, it should automatically spring back to its original position, indicating good sealing of the delivery valve assembly; otherwise, replace the delivery valve assembly. (6) Inspect the tappet body. The standard clearance between the injection pump body and the tappet body is 0–0.03mm. If it exceeds 0.2mm, replace the parts. (7) Check the clearance between the plunger flange and the groove of the control sleeve, which should be 0.02–0.08mm. If it exceeds 0.12mm, the control sleeve must be replaced.

Weidou Intelligent Technology specializes in selling German RIETSOHLE vacuum pumps, RIETSOHLE gear pumps, RIETSOHLE diaphragm pumps, RIETSOHLE centrifugal pumps, RIETSOHLE plunger pumps, RIETSOHLE vacuum pumps, RIETSOHLE screw pumps, RIETSOHLE submersible pumps, RIETSOHLE peristaltic pumps, RIETSOHLE lubrication pumps, RIETSOHLE vane pumps, RIETSOHLE metering pumps, RIETSOHLE hand pumps, RIETSOHLE drum pumps, RIETSOHLE lobe pumps, RIETSOHLE booster pumps, RIETSOHLE liquid pumps, RIETSOHLE air pumps. Original German imports. Welcome inquiries and orders from users.