German weber Sensors sensors, weber Sensors models, weber Sensors prices

weber Sensors sensors, also known as displacement sensors, are a type of sensor used to detect the distance to an object to perform a preset function, and have gained widespread adoption. Main products include mobile phone distance sensors and long-distance measurement sensors, applied in smart belts. Distance sensors can be classified into optical distance sensors, infrared distance sensors, ultrasonic distance sensors, and others based on their working principles. Most distance sensors used in mobile phones are infrared distance sensors, which feature an infrared emitting tube and an infrared receiving tube. When the infrared light emitted by the transmitting tube is received by the receiving tube, it indicates a short distance, requiring the screen to be turned off to prevent accidental operation. When the receiving tube does not receive the infrared light from the transmitting tube, it indicates a long distance, and the screen does not need to be turned off. The working principles of other types of distance sensors are similar; they determine distance by emitting and receiving a substance, such as ultrasonic waves or light pulses.

weber Sensors sensor classification

1) Laser speed measurement: With the rise of precision manufacturing and the demand for cost savings, non-contact speed sensors are gradually replacing contact speed sensors. The most common and high-precision non-contact laser speed sensor on the market is the ZLS-Px aberration speed sensor. The aberration speed sensor has two ports: one emission port that emits LED light source, and one high-speed photography port that achieves CCD area high-speed imaging comparison. By comparing images at two points in time within an extremely short period, the distance moved by the measured object is determined, and the sensor's internal algorithm outputs the object's speed in real time. As shown in the figure, (1) is the LED light emission port, (2) is the camera reception port, (3) and (4) are terminal blocks, and (5) are mounting screw holes. (1) The LED light emission port directs laser at the measured object, which reflects to the (2) camera reception port. Upon receiving the signal, it is transmitted to the signal processor, which calculates the speed via an algorithm. The ZLS-Px aberration speed sensor can simultaneously measure speed and length in two directions. It can detect whether the measured body has stopped and determine its direction of motion. Mount the sensor on a stable bracket to ensure that the rotating object does not generate excessive vibration during rotation, allowing measurement of the rotation angle and speed of the rotating body. 2) Radar speed measurement: Traditional speed measurement mostly involves rotary motion speed measurement and linear motion speed measurement. However, there are many irregular speed measurements in industrial automation, such as athlete speed measurement, traffic vehicle speed measurement, and golf ball speed measurement. Radar speed sensors can meet these requirements.

weber Sensors sensor principle

A transmissive speed sensor consists of a slotted or notched disk, a light source, and a phototube. When the disk rotates with the shaft under test, light can only reach the phototube through the holes or notches. When the phototube is illuminated, its reverse resistance is very low, thus outputting an electrical pulse signal. When the light source is blocked by the disk, the reverse resistance of the phototube is very high, and there is no signal output at the output terminal. In this way, based on the number of holes or notches on the disk, the rotational speed of the shaft under test can be measured. The number of holes or notches on the disk is usually set to sixty, so that for each revolution of the shaft under test, the photoelectric converter outputs 60 pulse signals. If the time base signal of the electronic counter is set to 1s, the rotational speed of the shaft under test can be read directly. The principle of a reflective speed sensor is the same as that of a transmissive one; it converts changes in received light into changes in electrical signals via a phototube, but it obtains pulse signals through light reflection, typically by adhering reflective material to the measurement area of the shaft under test to form a reflective surface. Commonly used reflective materials are specialized speed-measuring reflective paper tapes (adhesive tapes); aluminum foil or other reflective materials can also be used as substitutes; sometimes white paint can be applied to the measurement area to serve as a reflective surface. The emitter and the reflective surface must be properly configured, typically, the distance between them is 5-15M. When the measured shaft rotates, the photoelectric element receives pulsating light, and outputs the corresponding electrical signal to the electronic counter, thereby measuring the rotational speed of the measured shaft. The waveform of the output signal from the photoelectric speed sensor is relatively regular, close to a standard square wave, with almost no interference signals generated. However, for transmissive types, vibration can reduce the lifespan of the light source, so they are not suitable for use in conditions with strong vibration. The reflective type has no mechanical connection with the measured shaft, making it convenient to use.

weber Sensors sensor industry applications

1) Modern vehicles are generally equipped with engine control, autonomous driving, ABS, TRC, automatic door locking, active suspension, guidance systems, electronic instruments, and other devices, all of which require vehicle speed signals. Therefore, the accuracy and stability of the output signals from speed measurement sensors will greatly affect these control units. Automotive speed sensors mostly adopt a Hall-effect structure. A Hall speed sensor is a magnetoelectric sensor based on the Hall effect, characterized by high sensitivity to magnetic fields, stable output signals, high frequency response, strong anti-electromagnetic interference capability, simple structure, and ease of use. It mainly consists of permanent magnets with a specific number of pole pairs (generally 4 or 8 pairs), Hall elements, a rotating mechanism, and input/output connectors. Its working principle is that when the sensor's rotating mechanism is driven externally, it rotates the permanent magnet, causing periodic changes in the magnetic field passing through the Hall element. This induces changes in the output voltage of the Hall element, which is processed by subsequent circuits to form stable pulse voltage signals as the output of the speed sensor. Key electrical technical parameters for Hall-structure speed sensors include: output signal high voltage, low voltage, duty cycle, period, rise time, fall time, and pulses per period. To ensure product performance reliability, these parameters must be quantitatively tested before factory shipment. Test systems featuring integration and intelligence, efficient automatic measurement, software calculation, and graphical or tabular display of results are increasingly favored by automotive speed sensor manufacturers. A comprehensive testing device has been developed for performance measurement of common Hall-effect vehicle speed sensors. Considering cost, the high-speed counter port of a microprocessor is used for data acquisition from the vehicle speed sensor, and software control is used to calculate and graphically display the collected data. The completed testing device offers advantages such as high testing accuracy, reliable data communication, a user-friendly graphical interface, strong anti-interference capability, simple and intuitive testing process, and low system development cost. It has good market promotion potential, indicating huge application prospects for speed sensors in vehicle speed detection. 2) Speed sensors for belt conveyors use Hall sensors, which are sensors that utilize the Hall effect to achieve magnetoelectric conversion. The Hall effect was discovered in 1879 and has a development history of over 100 years. However, its application gained attention and widespread adoption in the 50s of this century due to the rapid development of microelectronics, leading to the continuous development of various Hall elements. China began increasing research on Hall elements in the 20s of the 70 century. After nearly several decades of research and development, it is now possible to produce Hall elements with various performances, such as standard type, high sensitivity type, low temperature coefficient type, temperature and magnetic measurement type, and switch-type Hall elements. Due to the characteristics of Hall sensors, such as high sensitivity, good linearity, high stability, small size, and high temperature resistance, they are widely used in various industrial fields, including non-electrical quantity measurement, automatic control, computer devices, and modern military technology.

Weidou Intelligent Technology specializes in selling German weber Sensors sensors, weber Sensors proximity sensors, weber Sensors distance sensors, weber Sensors vision sensors, weber Sensors displacement sensors, weber Sensors torque sensors, weber Sensors speed sensors, weber Sensors photoelectric sensors, weber Sensors position sensors, weber Sensors angle sensors, weber Sensors tactile sensors, weber Sensors temperature sensors, weber Sensors pressure sensors, weber Sensors flow sensors, weber Sensors level sensors, weber Sensors motion sensors, and weber Sensors process sensors. Original German imports. Welcome inquiries and orders from users.