German Spohn + Burkhardt sensors, Spohn + Burkhardt models, Spohn + Burkhardt prices

Spohn + Burkhardt sensors are devices that convert magnetic signals into electrical signals. By utilizing the transformation relationship between magnetic quantities and other physical quantities, with the magnetic field as a medium, they can also convert signals of other non-electrical physical quantities into electrical signals. There are two driving methods: one uses permanent magnets, and the other uses electromagnetic coils. The former is mostly used for detection; for example, if a moving part is made of a magnet, it will attract and emit a signal once it approaches the magnetic induction sensor. The latter is mostly used for control; if the electromagnetic coil is energized, the contacts will close. Replacing limit switches that rely on collision contact with magnetic induction sensors can improve system reliability and service life; therefore, they are often used in programmable logic controllers as signaling devices for position arrival.

Spohn + Burkhardt sensor classification

Lasers can be divided into 4 types based on the working medium. (1) Solid-state lasers: Their working medium is solid. Common types include ruby lasers, neodymium-doped yttrium aluminum garnet lasers (i.e., YAG lasers), and neodymium glass lasers. Their structures are roughly similar, characterized by being small, robust, and high-power. Neodymium glass lasers are the devices with the highest pulsed output power, reaching tens of megawatts. (2) Gas lasers: Their working medium is gas. There are now various gas atomic, ion, metal vapor, and gas molecular lasers. Common types include carbon dioxide lasers, helium-neon lasers, and carbon monoxide lasers. Their shape resembles ordinary discharge tubes, characterized by stable output, good monochromaticity, and long life, but lower power and lower conversion efficiency. (3) Liquid lasers: These can be further divided into chelate lasers, inorganic liquid lasers, and organic dye lasers, among which organic dye lasers are the most important. Their main characteristic is continuously tunable wavelength. (4) Semiconductor lasers: These are a relatively newer type of laser, with gallium arsenide lasers being the more mature variant. They are characterized by high efficiency, small size, light weight, and simple structure, making them suitable for carrying on aircraft, warships, tanks, and by infantry. They can be made into rangefinders and sights. However, they have lower output power, poorer directionality, and are significantly affected by ambient temperature.

Spohn + Burkhardt sensor principle

When a laser sensor operates, the laser emitting diode first emits laser pulses toward the target. After reflecting off the target, the laser scatters in all directions. Part of the scattered light returns to the sensor receiver, is received by the optical system, and is imaged onto an avalanche photodiode. An avalanche photodiode is an optical sensor with internal amplification capability, so it can detect extremely weak light signals and convert them into corresponding electrical signals. The common type is the laser distance sensor, which determines the target distance by recording and processing the time elapsed from the emission of the light pulse to its reception. Laser sensors must measure transmission time with extreme precision because the speed of light is very fast.

Spohn + Burkhardt sensor applications

Over-limit detection of vehicle width and height: Laser sensors are used for rapid measurement. The network kernel of the PC industrial PC and visualization programming software VB is used for real-time data transmission and processing with the sensors. User-friendly upper computer control software has also been designed. Field test data shows that the system has good real-time performance and high measurement accuracy, possessing certain practical value. Highway toll stations: Used at highway toll stations for vehicle counting and safety protection. Malaysia's Teras company has already applied hundreds of BEA laser sensors in its manual and automatic toll station systems. The laser sensors use the Time of Flight (TOF) measurement principle to form 4 planes within the detection area to inspect vehicles. Meanwhile, the product also features functions such as anti-rear-end collision and vehicle safety protection. Compared with traditional light curtains, laser sensors offer advantages such as high sensitivity, high accuracy, convenient installation, high cost-performance ratio, and strong stability. Google's second-generation driverless car: Equipped with laser sensors, the prototype of Google's second-generation autonomous vehicle still has a quite prominent laser sensor on top, while other sensors are set up very discreetly. Obvious Google driverless car logos are posted on the front, rear, and both sides of the vehicle. The control and driving principle of the Google driverless car involves numerous sensors installed around the car continuously collecting precise data about the vehicle itself and its surroundings. The onboard processor analyzes and calculates this data, then controls the vehicle's movement based on the results. The driverless car uses GPS equipment and sensors to accurately locate the vehicle's position and forward speed, identifying surrounding pedestrians, vehicles, bicycles, traffic lights, and many other objects. On the roof of this Lexus is a 360° rotating laser holographic sensor, which can almost simultaneously sense conditions in front of, to the side of, and behind the car. Data collected by the sensor is input via green data cables into the processor located on the right rear side of the vehicle. This laser sensor also allows the driverless car to achieve global precise positioning. The original L-shaped Lexus emblem on the front of the car was removed and replaced with a radar sensor, used to measure forward distance and vehicle speed to determine the condition ahead and control safe acceleration and deceleration. Position sensors are also mounted on the tire hubs to detect wheel rotation, helping the vehicle with positioning. The heart of the Google driverless car—the processor—is located on the right rear side of the vehicle. Data information from various sensors is transmitted here via data wires, where it is analyzed and processed by software for precise sensing and judgment of different objects near the driverless car. In addition to analyzing and judging the current positions of objects around the driverless car, the vehicle needs to use software to calculate and accurately predict the possible next position of each object. Finally, the driverless car makes safe driving decisions based on all collected data, including controlling vehicle speed and distance from surrounding vehicles.

Weidou Intelligent Technology professionally sells German Spohn + Burkhardt sensors, Spohn + Burkhardt proximity sensors, Spohn + Burkhardt distance sensors, Spohn + Burkhardt vision sensors, Spohn + Burkhardt displacement sensors, Spohn + Burkhardt torque sensors, Spohn + Burkhardt speed sensors, Spohn + Burkhardt photoelectric sensors, Spohn + Burkhardt position sensors, Spohn + Burkhardt angle sensors, Spohn + Burkhardt tactile sensors, Spohn + Burkhardt temperature sensors, Spohn + Burkhardt pressure sensors, Spohn + Burkhardt flow sensors, Spohn + Burkhardt level sensors, Spohn + Burkhardt motion sensors, Spohn + Burkhardt process sensors. Original imports from Germany. Welcome inquiries and orders from users.