German SGB sensor SGB model SGB price

SGB sensor precisely measures the actual displacement of the detected product by detecting the absolute position of the movable magnetic ring through internal non-contact measurement and control technology; the high precision and high reliability of this sensor have been widely applied in thousands of practical cases. Since the movable magnetic ring used for position determination and the sensitive element do not come into direct contact, the sensor can be used in extremely harsh industrial environments and is not easily affected by oil stains, solutions, dust, or other contaminants. In addition, the sensor uses high-tech materials and advanced electronic processing technology, so it can be used in environments with high temperature, high pressure, and high oscillation. The sensor output signal is the absolute displacement value; even if the power is interrupted and reconnected, data will not be lost, and there is no need to re-zero. Since the sensitive element is non-contact, continuous repeated detection will not cause any wear to the sensor, which can greatly improve detection reliability and service life.

SGB sensor classification

1) Laser speed measurement: With the rise of precision manufacturing and the demand for cost savings, non-contact speed sensors will gradually replace contact speed sensors. Currently, the most accurate and commonly used non-contact laser speed sensor on the market is the ZLS-Px aberration speed sensor. The aberration speed sensor has two ports: one emission port that emits LED light source; and one high-speed photography port that achieves CCD area high-speed imaging comparison. By comparing images at two points in time within an extremely short period, the distance the object moves is determined, and combined with the algorithm inside the sensor, the speed of the object is output in real time. As shown in the figure, (1)LED light emission port, (2) camera reception port, (3), (4) terminal blocks, (5) fixing screw holes. (1)LED light emission port emits laser towards the object under test, which reflects to (2) camera reception port. After receiving the signal, it is transmitted to the signal processor, which calculates its speed through algorithms. ZLS-Px aberration speed sensor can simultaneously measure speed and length in two directions. It can not only detect whether the object under test has stopped, but also detect the direction of movement of the object under test. Fix the sensor on a stable bracket to ensure that the rotating object does not produce excessive vibration during rotation, thereby measuring the rotation angle and rotational speed of the rotating object. 2) Radar speed measurement: Traditional speed measurement mostly involves rotary motion speed measurement and linear motion speed measurement. However, there are many irregular speed measurements in real-world industrial automation, such as athlete motion speed measurement, traffic vehicle speed measurement, and golf ball speed measurement. Radar speed sensors can meet these requirements.

SGB sensor principle

The transmissive speed sensor consists of a slotted or apertured disk, a light source, and a phototube. When the disk rotates with the shaft under test, light can only reach the phototube through the holes or slots. When the phototube is illuminated, its reverse resistance is very low, thus outputting an electrical pulse signal. When the light source is blocked by the disk, the reverse resistance of the phototube is very high, and there is no signal output at the output terminal. In this way, based on the number of holes or slots on the disk, the rotational speed of the shaft under test can be measured. The number of holes or slots on the disk is usually set to sixty, therefore, for each revolution of the shaft under test, the photoelectric converter outputs 60 pulse signals. If the time base signal of the electronic counter is set to 1s, the rotational speed of the shaft under test can be read directly. The principle of the reflective speed sensor is the same as that of the transmissive type; it converts changes in received light into changes in electrical signals via a phototube, but it obtains pulse signals through light reflection, typically by adhering reflective material to the measurement area of the shaft under test to form a reflective surface. Commonly used reflective materials are special-purpose speed-measuring reflective paper tapes (adhesive tapes); aluminum foil or other reflective materials may also be used as substitutes; sometimes, white paint can be applied to the measurement area to serve as a reflective surface. The emitter and the reflective surface must be properly configured, typically with a distance of 5-15M between them. When the measured shaft rotates, the photoelectric element receives pulsating light, and outputs the corresponding electrical signal to the electronic counter, thereby measuring the rotational speed of the measured shaft. The waveform of the output signal from the photoelectric speed sensor is relatively regular, close to a standard square wave, with almost no interference signals generated. However, for the transmissive type, vibration reduces the service life of the light source, so it is not suitable for use in conditions with strong vibration. The reflective type has no mechanical connection with the measured shaft, making it convenient to use.

SGB sensor industry applications

1) Modern cars are generally equipped with engine control, autonomous driving, ABS, TRC, automatic door locking, active suspension, guidance systems, electronic instruments, and other devices, all of which require vehicle speed signals. Therefore, the accuracy and stability of the output signal from the speed sensor measuring vehicle operation will have a significant impact on these control units. Automotive speed sensors mostly adopt a Hall-effect structure. A Hall speed sensor is a magnetoelectric sensor based on the Hall effect, characterized by high sensitivity to magnetic fields, stable output signal, high frequency response, strong anti-electromagnetic interference capability, simple structure, and ease of use. It mainly consists of permanent magnets with a specific number of magnetic pole pairs (generally 4 or 8 pairs), Hall elements, a rotating mechanism, and input/output connectors. Its working principle is that when the sensor's rotating mechanism rotates under external drive, it drives the permanent magnet to rotate, causing periodic changes in the magnetic field passing through the Hall element, which induces changes in the output voltage of the Hall element. Subsequent circuit processing forms stable pulse voltage signals as the output signal of the speed sensor. The main electrical technical parameters of Hall-structure speed sensors include: output signal high voltage, low voltage, duty cycle, period, rise time, fall time, and number of pulses per cycle. To ensure product performance and reliability, these parameters must be quantitatively tested before leaving the factory. Test systems featuring integration and intelligence, efficient automatic measurement, software calculation, and graphical or tabular display of test results are increasingly favored by automotive speed sensor manufacturers. A comprehensive testing device developed for performance measurement of commonly used Hall-effect vehicle speed sensors. Considering cost, the high-speed counter port of a microprocessor is used for data acquisition from the vehicle speed sensor, and software control is used to calculate and graphically display the acquired data. The completed testing device offers advantages such as high testing precision, reliable data communication, a user-friendly graphical interface, strong anti-interference capability, simple and intuitive testing process, and low system development cost. It has good market promotion potential, so speed sensors will have huge application prospects in vehicle speed detection. 2) Speed sensors for belt conveyors adopt Hall sensors, which are sensors that utilize the Hall effect to achieve magnetoelectric conversion. The Hall effect was discovered in 1879 and has a development history of more than 100 years, but its application gained attention and widespread adoption only in the 50s of this century due to the rapid development of microelectronics, leading to the continuous development of various Hall elements. China began to increase research on Hall elements in the 20s of the 70th century. After nearly several decades of research and development, it is now possible to produce Hall elements with various performances, such as ordinary type, high sensitivity type, low temperature coefficient type, temperature and magnetic measurement type, and switch-type Hall elements. Due to the characteristics of Hall sensors, such as high sensitivity, good linearity, high stability, small size, and high temperature resistance, they have been widely applied in various industrial fields including non-electrical quantity measurement automatic control, computer devices, and modern military technology.

Weidou Intelligent Technology specializes in selling German SGB sensors, SGB proximity sensors, SGB distance sensors, SGB vision sensors, SGB displacement sensors, SGB torque sensors, SGB speed sensors, SGB photoelectric sensors, SGB position sensors, SGB angle sensors, SGB tactile sensors, SGB temperature sensors, SGB pressure sensors, SGB flow sensors, SGB level sensors, SGB motion sensors, SGB process sensors. Original imports from Germany. Welcome customers to inquire and order.