German Fagus GreCon sensors, Fagus GreCon models, Fagus GreCon prices

Fagus GreCon sensors are devices or apparatuses that can sense pressure signals and convert them into usable output electrical signals according to a specific pattern. Pressure sensors typically consist of pressure-sensitive elements and signal processing units. Depending on the type of test pressure, pressure sensors can be classified into gauge pressure sensors, differential pressure sensors, and absolute pressure sensors. Pressure sensors are the most commonly used sensors in industrial practice, widely applied in various industrial automation control environments, involving water conservancy and hydropower, railway transportation, intelligent buildings, production automation control, aerospace, military industry, petrochemicals, oil wells, electric power, ships, machine tools, pipelines, and many other industries.

Fagus GreCon sensor working principle

A magnetic induction sensor is a contact sensor; its structural schematic is shown in the figure. It consists of two alloy reeds with high magnetic permeability and low coercivity, sealed in a glass tube filled with inert gas. A certain overlap and appropriate gap are maintained between the two reeds, with gold-plated ends serving as contacts, and leads welded outside the tube. When the magnetic induction intensity at the sensor's location is sufficiently high, the two reeds attract each other, causing the contacts to close; when the magnetic field weakens to a certain extent, they release under the elastic force of the reeds themselves. When driven by a permanent magnet, magnetic induction sensors are mostly used for detection, such as limit switches, replacing travel switches that rely on collision contact, thereby improving system reliability and service life. They are often used in PLC controllers as communication signals for position control.

Fagus GreCon sensor precautions

The voltage used for DC magnetic induction sensors is generally 3~30V DC, with a typical application voltage range of 5~24V DC. Excessively high voltage causes internal component temperature rise, making the sensor unstable, while excessively low voltage makes it susceptible to external temperature changes affecting magnetic field strength characteristics, leading to circuit malfunction. When using Hall sensors to drive inductive loads, please connect freewheeling diodes in parallel across the load terminals; otherwise, transient high-voltage pulses during long-term operation of the inductive load will affect the service life of the Hall sensor. To ensure no accidents occur, please check whether the wiring is correct and verify that the voltage is the rated value before powering on.

Fagus GreCon sensor applications

1) Motor Industry: Brushless motors have a series of advantages such as small size, light weight, high efficiency, convenient speed regulation, low maintenance, long life, and no electromagnetic interference, with an annual demand numbering in the hundreds of millions. In brushless motors, magnetic sensors are used for rotor magnetic pole position sensing and stator armature current commutation. Many magnetic sensors, such as Hall devices, Wiegand devices, and magnetoresistive devices, can be used, but Hall devices are predominantly used. Rotary encoders are used for motor speed detection and control; optical encoders were previously common. The use of magnetic encoders shows increasing advantages and is gradually replacing optical devices. Magnetic sensors can also be used for motor overload protection (mainly using Hall current sensors) and torque detection. 2) Power Electronics Technology: Power electronics technology is the combination of power technology and electronic technology, enabling mutual conversion between AC and DC currents, and allowing free regulation of current, voltage, and frequency within required ranges. Using these technologies and products, various special power supplies (such as UPS, high-frequency power supplies, switching power supplies, arc welder inverter power supplies, etc.) and AC variable frequency drives (AC VFDs are used for motor speed control, offering excellent energy-saving effects) can be made. The core of these conversion devices is high-power semiconductor devices. Various current sensors based on magnetic sensors are used to monitor, control, and protect these high-power devices. Hall current sensors have fast response speeds and rely on magnetic field coupling with the controlled circuit without connecting to the main circuit, resulting in low power consumption, strong overload resistance, good linearity, and high reliability. They can serve as overcurrent protection drivers for high-power devices and as feedback devices, becoming a control link in automatic control loops. Using conversion technology can save significant amounts of energy; abroad, 95% of electrical energy is obtained through conversion. Although conversion technology has received high attention domestically, only 5% of electrical energy undergoes this transformation, indicating huge application prospects. Among these, the potential absorption of a large number of current sensors represents another huge industrial application area for magnetic sensors. 3) Energy Management: The automatic monitoring system of the power grid needs to collect large amounts of data, which, after computer processing, monitors the operating status of the grid and performs load distribution adjustment and safety protection. Each control link of the automatic monitoring system can be implemented using current sensors and transformers based on magnetic sensors. Hall current sensors are gradually being applied in power grid systems. Electricity meters made with Hall devices have gradually shifted from research to practical application; they can automatically bill and display power factor for timely adjustment, ensuring efficient electricity usage. 4) Machine Technology and Information Read/Write Heads: In addition to magnetic tapes and disks, magnetic information recording devices include magnetic cards, magnetic ink record books, and magnetic records on banknotes, creating huge demand for magnetic information storage and readout sensors. Inductive heads, thin-film magnetoresistive heads, and amorphous heads are extensively used. With increased recording density, such as up to 100G bytes, heads with higher sensitivity and spatial resolution are required. Giant magnetoresistive heads based on multilayer metal films, amorphous alloy heads made from amorphous alloy wires, and giant magneto-impedance heads are engaging in intense competition. 5) Automotive Industry: A large number of motors are used in automobiles (advanced cars require approximately 40 to 60 motors per vehicle, while standard cars have 15 motors, showing a trend towards brushless designs). The extensive use of magnetic sensors in these motors is self-evident. Another area with heavy use of magnetic sensors is the automotive ABS system (Anti-lock Braking System), where each car uses an average of 4 to 6 speed sensors, primarily inductive speed sensors. New types of Hall gear sensors, as well as Wiegand devices, amorphous devices, and magnetoresistive devices, are gradually being promoted and are about to enter this field. Additionally, there are speed sensors and igniters used for ignition timing in automobile engine systems. These aspects also mainly use inductive sensors. Hall gear sensors and Hall plate switches are already used in some car models. According to Honeywell, by June 6, 1996, they had supplied the automotive industry with 8000 million Hall vane switches and 300 million Hall gear speed sensors. It is predicted that in the future, more than 30 magnetic sensors similar to Hall sensors will be adopted in a single car. Furthermore, in fields such as industrial automatic control, robotics, office automation, home appliances, and various security systems, in addition to the widespread use of brushless DC motors and AC variable frequency drives, a large number of magnetic temperature controllers are used in devices such as refrigerators, air conditioners, and rice cookers. By the mid-80s, the number exceeded hundreds of millions.

Weidou Intelligent Technology specializes in selling German Fagus-GreCon sensors, Fagus-GreCon proximity sensors, Fagus-GreCon distance sensors, Fagus-GreCon vision sensors, Fagus-GreCon displacement sensors, Fagus-GreCon torque sensors, Fagus-GreCon speed sensors, Fagus-GreCon photoelectric sensors, Fagus-GreCon position sensors, Fagus-GreCon angle sensors, Fagus-GreCon tactile sensors, Fagus-GreCon temperature sensors, Fagus-GreCon pressure sensors, Fagus-GreCon flow sensors, Fagus-GreCon level sensors, Fagus-GreCon motion sensors, Fagus-GreCon process sensors. Original German imports. Welcome inquiries and orders from users.