German EBERLE sensors, EBERLE models, EBERLE prices

EBERLE sensors precisely measure the actual displacement of the detected product by detecting the absolute position of a movable magnetic ring using internal non-contact measurement and control technology. The high precision and high reliability of these sensors have been widely applied in thousands of practical cases. Since the movable magnetic ring used for position determination and the sensitive element do not come into direct contact, the sensors can be used in extremely harsh industrial environments and are not easily affected by oil stains, solutions, dust, or other contaminants. In addition, the sensors use high-tech materials and advanced electronic processing technology, enabling them to operate in high-temperature, high-pressure, and high-vibration environments. The sensor output signal is an absolute displacement value; even if the power supply is interrupted and reconnected, data is not lost, and there is no need to re-zero. Since the sensitive element is non-contact, repeated detection does not cause any wear to the sensor, greatly improving detection reliability and service life.

EBERLE sensor operating principle

Photoelectric sensors achieve control by converting changes in light intensity into changes in electrical signals. Generally, photoelectric sensors consist of three parts: a transmitter, a receiver, and a detection circuit. The transmitter emits a light beam toward the target. The emitted light beam generally originates from semiconductor light sources, such as light-emitting diodes (LED), laser diodes, and infrared emitting diodes. The light beam is emitted continuously, or the pulse width is varied. The receiver consists of photodiodes, phototransistors, and photocells. Optical components such as lenses and apertures are installed in front of the receiver. Behind it is the detection circuit, which filters out valid signals and applies them. In addition, structural components of photoelectric switches include emitter plates and optical fibers.

EBERLE sensor classification

1) Slot-type photoelectric sensors: A slot-type photoelectric sensor is formed by mounting a light emitter and a receiver face-to-face on opposite sides of a slot. The emitter emits infrared or visible light, and the receiver detects the light when unobstructed. However, when the detected object passes through the slot, the light is blocked, causing the photoelectric switch to actuate and output a switching control signal to cut off or connect the load current, thereby completing a control action. Due to limitations imposed by the overall structure, the detection distance of slot-type switches is generally only a few centimeters. 2) Through-beam photoelectric sensors: Separating the emitter and the receiver increases the detection distance. A through-beam separated photoelectric switch, abbreviated as a through-beam photoelectric switch, consists of one emitter and one receiver. The detection distance of through-beam photoelectric switches can reach several meters or even tens of meters. When using through-beam photoelectric switches, the emitter and receiver are installed on opposite sides of the path through which the detected object passes. When the object passes and blocks the light path, the receiver actuates and outputs a switching control signal. 3) Retroreflective photoelectric switches: The emitter and receiver are housed in the same unit, with a reflector plate installed in front. This configuration uses the reflection principle to perform photoelectric control and is called a retroreflective (or mirror-reflective) photoelectric switch. Under normal conditions, the light emitted by the emitter is reflected back by the reflector plate and received by the receiver. Once the detected object blocks the light path and the receiver no longer receives light, the photoelectric switch actuates and outputs a switching control signal. 4) Diffuse reflective photoelectric switches: The detection head of a diffuse reflective photoelectric switch also contains an emitter and a receiver, but there is no reflector plate in front. Under normal conditions, the receiver does not detect the light emitted by the emitter. During detection, when the object passes, it blocks the light and reflects part of it back. The receiver then detects the light signal and outputs a switching signal.

EBERLE sensor application cases

1) Application of photoelectric sensors in laser weapons: Since photoelectric sensors are particularly sensitive to infrared radiation, visible light, or both, they are more likely to become targets of laser attacks. In addition, electronic systems and the sensors themselves are highly susceptible to interference from thermal noise and electromagnetic noise generated by lasers, preventing normal operation. Methods by which laser weapons on the battlefield attack photoelectric sensors mainly include the following: using a laser beam of appropriate energy to "blind" the sensor, rendering it unable to detect or continue tracking already detected targets. Alternatively, if the sensor is guiding a weapon toward a target, blinding will cause it to lose the target. In summary, since sensors play an increasingly important role on the battlefield and are vulnerable to laser attacks, they have become the preferred targets for low-energy laser weapons. 2) Application of photoelectric sensors in automatic meter reading systems: With the development of microelectronics, sensor technology, computer technology, and modern communications technology, photoelectric sensors can be used to develop automatic meter reading systems. The aluminum disk of an electricity meter rotates under the torque generated by eddy currents and magnetic fields. Using photoelectric sensors converts the number of rotations of the aluminum disk into pulse counts. For example, by partially blackening a rotating shiny aluminum disk and pairing it with a reflective photoelectric emitter-receiver pair, pulses are generated at the blackened sections as the disk rotates. The number of rotations is sampled and converted into corresponding pulse counts, which are then sent via an optocoupler isolation circuit to the T0 port of the CPU for counting processing. Using optocoupler isolators effectively prevents interference signals from entering the microcomputer. Combined with other transmission methods, this forms an automatic meter reading system. 3) Application of photoelectric sensors in monitoring smoke and dust pollution: Photoelectric sensors are small electronic devices that detect changes in received light intensity and achieve control functions by converting these changes into electrical signals. Due to characteristics such as non-contact operation, fast response, and reliable performance, photoelectric sensors are widely used in industrial automation equipment and robotics. We can utilize the characteristics of photoelectric sensors to detect smoke and dust conditions, so the strength of the output signal from the photoelectric sensor reflects changes in flue gas turbidity. 4) Hygienic washdown-resistant photoelectric sensors: Washdown-resistant sensors provide extremely high reliability and ease of use while minimizing operating costs. Equipped with IO-Link interfaces and the proTect+ sealing concept, which significantly extends service life, these two new sensors are suitable for demanding application environments and are an ideal solution for the food and beverage industry.

Weidou Intelligent Technology specializes in selling German EBERLE sensors, EBERLE proximity sensors, EBERLE distance sensors, EBERLE vision sensors, EBERLE displacement sensors, EBERLE torque sensors, EBERLE speed sensors, EBERLE photoelectric sensors, EBERLE position sensors, EBERLE angle sensors, EBERLE tactile sensors, EBERLE temperature sensors, EBERLE pressure sensors, EBERLE flow sensors, EBERLE level sensors, EBERLE motion sensors, and EBERLE process sensors. Original German imports. Welcome inquiries and orders from users.