German AXISDRIVER sensor AXISDRIVER model AXISDRIVER price

AXISDRIVER sensors are devices or units that can sense pressure signals and convert them into usable output electrical signals according to a specific pattern. Pressure sensors typically consist of a pressure-sensitive element and a signal processing unit. Depending on the type of test pressure, pressure sensors can be classified into gauge pressure sensors, differential pressure sensors, and absolute pressure sensors. Pressure sensors are one of the most commonly used sensors in industrial practice, widely applied in various industrial automation environments, including water conservancy and hydropower, railway transportation, smart buildings, production automation control, aerospace, military industry, petrochemicals, oil wells, electric power, ships, machine tools, pipelines, and many other industries.

AXISDRIVER sensor features

Currently, baffles can be designed based on the water flow rate to reduce the water resistance generated by the flow sensor, thereby reducing head loss in the water system. However, due to long-term impact from water flow, baffles still suffer from fatigue issues, and even factory-calibrated flow values may experience setpoint drift. They are typically used where precise protection of flow values is not required, i.e., for break-flow protection against sudden interruptions in water pipes within the system. In China, very few are designed specifically for water-source heat pump units. The baffle type is specifically developed for water flow monitoring in water-loop/ground-source heat pump air conditioning units. It is equipped with different baffles for different pipe diameters, and the water resistance of each baffle does not exceed 0.5 meters of water column, which is significantly lower than that of target-type sensors. Each baffle-type flow sensor is equipped with pipe fittings identical to those of the water-loop heat pump unit's water pipes. On-site installation only requires connecting to the water pipe without any modification to the baffle. Additionally, the pressure rating of the baffle-type flow switch exceeds 25bar, making it a low-cost flow switch for water-loop heat pump units with less stringent flow requirements. Feedback from use in water-loop/ground-source heat pump units indicates that differential pressure switches can effectively identify problems in the on-site installation of water piping for water-loop heat pump units, completely avoiding heat exchanger freeze-up caused by low water flow. Flow sensors can also protect against heat exchanger freeze-up due to reduced water flow caused by clogged water filters. Furthermore, water pipe differential pressure switches do not carry the risk of fatigue failure associated with target flow switches. Especially when there is a small amount of air in the water pipes, the flow sensor operates very stably without the floating issues seen in target flow switches. Feedback from years of use has not revealed any failures of the differential pressure switch itself.

AXISDRIVER sensor principle

Basic principles and types of ultrasonic flowmeters: When ultrasonic waves propagate through a flowing fluid, they carry information about the fluid's flow velocity. Therefore, the fluid's flow velocity can be detected by receiving the ultrasonic waves, which is then converted into flow rate. Depending on the detection method, ultrasonic flowmeters can be classified into different types such as transit-time difference method, Doppler method, beam deflection method, noise method, and correlation method. Ultrasonic flowmeters are non-contact instruments that have only begun to be applied in the last decade or so with the rapid development of integrated circuit technology. They are suitable for measuring fluids that are difficult to contact and observe, as well as large-diameter pipe flows. Linked with level gauges, they can measure open-channel flow. Using ultrasonic flow measurement avoids installing measuring elements in the fluid, thus not altering the fluid's flow state or generating additional resistance. Instrument installation and maintenance do not affect the operation of production pipelines, making it an ideal energy-saving flowmeter. Industrial flow measurement commonly faces difficulties in measuring large pipe diameters and high flow rates. This is because general flowmeters incur manufacturing and transportation difficulties, increased costs, and higher energy losses as the measurement pipe diameter increases. Ultrasonic flowmeters avoid these disadvantages. Since all types of ultrasonic flowmeters can be installed externally for non-contact flow measurement, the instrument cost is basically independent of the measured pipe diameter. In contrast, the cost of other types of flowmeters increases substantially with diameter. Therefore, the larger the diameter, the more superior the cost-performance ratio of ultrasonic flowmeters compared to other types with similar functions. They are considered excellent instruments for large-diameter flow measurement. Doppler method ultrasonic flowmeters can measure two-phase media flow, making them suitable for measuring dirty flows such as sewage and drainage. In power plants.

AXISDRIVER sensor selection

When selecting flow sensors, users should choose suitable sensors based on their own needs. Many users have different requirements for the sensors they use, so the selected standards vary. If professional data and results are required, national standards should be selected. However, if the sensor is only used as a simple instrument for rough analysis within an enterprise, enterprise standards can be selected. When purchasing flow sensors, careful consideration is essential, and one should choose sensors with guaranteed quality and good usability. Many people mistakenly believe that new sensors necessarily have higher technology, which is a one-sided view. New products must possess mature technology to be considered good products. In many economic sectors, accurate flow measurement has become very important. Nowadays, sensors are basically used to measure flow quantities. Sensors sense fluid flow and convert it into usable output signals; installing sensors makes operation simpler and more convenient. The quantity of flowing objects passing through per unit time is called flow rate. Different flow sensors are used for different objects, often distinguished by the measured medium and measurement method. Flow sensors are generally used for the flow of media fluids in industrial pipelines. Under normal circumstances, there are various media such as gases, liquids, and steam. Several types of flow sensors can be universal for these various media types. The first is the vortex flow sensor. Another type is the ultrasonic flow sensor. With the development of ultrasonic technology, ultrasonic flow sensors can generally measure the flow of most flowing objects. Ultrasonic flow sensors have various measurement methods, each with its own characteristics. We should select based on factors such as the properties of the measured fluid, flow velocity distribution, pipeline installation location, and accuracy requirements. Since industrial flow measurement commonly faces difficulties in measuring large pipe diameters and high flow rates—because general flow sensors incur manufacturing and transportation difficulties, increased costs, and higher energy losses as the measurement pipe diameter increases—ultrasonic flowmeters avoid these disadvantages. The flow measurement accuracy of ultrasonic flow sensors is hardly affected by parameters such as the temperature, pressure, viscosity, and density of the measured fluid. They can also be made into non-contact and portable measuring instruments, thus solving flow measurement problems for strongly corrosive, non-conductive, radioactive, and flammable/explosive media that are difficult to measure with other types of instruments.

Weidou Intelligent Technology professionally sells German AXISDRIVER sensors, AXISDRIVER proximity sensors, AXISDRIVER distance sensors, AXISDRIVER vision sensors, AXISDRIVER displacement sensors, AXISDRIVER torque sensors, AXISDRIVER speed sensors, AXISDRIVER photoelectric sensors, AXISDRIVER position sensors, AXISDRIVER angle sensors, AXISDRIVER tactile sensors, AXISDRIVER temperature sensors, AXISDRIVER pressure sensors, AXISDRIVER flow sensors, AXISDRIVER level sensors, AXISDRIVER motion sensors, AXISDRIVER process sensors. Original imports from Germany. Welcome inquiries and orders from users.