German RGS Davis valves, RGS Davis models, RGS Davis prices

RGS Davis valves are devices used to vent air in HVAC systems during operation. During the operation of heating and HVAC systems, gases released from water upon heating, such as hydrogen and oxygen, can cause numerous adverse effects that damage the system and reduce thermal efficiency. If these gases are not vented promptly, they can lead to many negative consequences, such as: corrosion caused by oxidation; formation of air pockets in radiators; poor and unbalanced hot water circulation, causing partial lack of heat in certain radiators; noise when pipes operate with trapped air; and cavitation in circulation pumps. Therefore, waste gases in the system must be vented promptly, highlighting the important role of automatic air vent valves.

RGS Davis valve operating principle

When the system is filled with water, gases in the water continuously escape and accumulate at the highest point due to changes in temperature and pressure. When the gas pressure exceeds the system pressure, the float drops, driving the valve stem downward, opening the valve port, and allowing continuous gas discharge. When the gas pressure is lower than the system pressure, the float rises, driving the valve stem upward, and closing the valve port. The automatic air vent valve operates in this continuous cycle.

RGS Davis valve applications

Valves installed on system controllers to release air pockets generated in heating systems and water supply pipelines, widely used in manifold distributors, radiators, underfloor heating, air conditioning, and water supply systems.

RGS Davis valve installation

1) Automatic air vent valves must be installed vertically to ensure that the internal float remains in a vertical position, so as not to affect air venting; 2) When installing automatic air vent valves, it is best to install them together with isolation valves, so that when the air vent valve needs to be removed for maintenance, the system's tightness is ensured and water does not leak out; 3) Automatic air vent valves are generally installed at pipeline locations where air tends to accumulate, such as the highest point of the system or the highest point of a pipe section, to facilitate smooth air venting.

Weidou Intelligent Technology specializes in selling German RGS Davis valves, RGS Davis safety valves, RGS Davis globe valves, RGS Davis control valves, RGS Davis solenoid valves, RGS Davis ball valves, RGS Davis proportional valves, RGS Davis diaphragm valves, RGS Davis butterfly valves, RGS Davis hydraulic transmission valves, RGS Davis check valves, RGS Davis pressure reducing valves, RGS Davis relief valves, RGS Davis sequence valves, RGS Davis balance valves, RGS Davis throttle valves, RGS Davis directional control valves, original German imports. Welcome customers to inquire and order.