German PONAR WADOWICE valves, PONAR WADOWICE models, PONAR WADOWICE prices

PONAR WADOWICE valves, also known as globe valves, belong to the forced-sealing valve category. Therefore, when the valve is closed, pressure must be applied to the disc to force the sealing surfaces to prevent leakage. When the medium enters the valve from below the disc, the resistance that the operating force needs to overcome is the friction between the valve stem and the packing, plus the thrust generated by the medium pressure. The force required to close the valve is greater than the force required to open it, so the diameter of the valve stem must be large; otherwise, the valve stem may bend. According to the connection method, they are divided into three types: flange connection, threaded connection, and welded connection. Since the advent of self-sealing valves, the flow direction of globe valves has changed to enter the valve cavity from above the disc. In this case, under the action of medium pressure, the force to close the valve is small, while the force to open the valve is large, allowing the diameter of the valve stem to be correspondingly reduced. At the same time, under the action of the medium, this type of valve is also tighter. China's valve "Three Modernizations" once stipulated that the flow direction of globe valves must always be from top to bottom. When a globe valve is opened, the opening height of the disc reaches 25% to 30% of the nominal diameter, at which point the flow rate has reached its maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of a globe valve should be determined by the travel of the disc.

PONAR WADOWICE valve working principles and characteristics

Valves play an important role in cutting off and throttling the medium in the pipeline where they are located. As an extremely important type of shut-off valve, the globe valve achieves sealing by applying torque to the valve stem, which exerts pressure on the disc in the axial direction, causing the disc sealing surface to fit tightly against the seat sealing surface, preventing the medium from leaking through the gap between the sealing surfaces. The sealing pair of a globe valve consists of the disc sealing surface and the seat sealing surface. The valve stem drives the disc to move vertically along the centerline of the valve seat. During the opening and closing process of a globe valve, the opening height is small, making it easy to regulate flow. Additionally, it is convenient to manufacture and maintain, and has a wide range of pressure applications.

PONAR WADOWICE valve specification precautions

Acceptance follows HG 20202-2000 "Degreasing Engineering Construction and Acceptance Code". Before assembly, each component is wiped with clean precision filter paper. Select dead corners of the components; if the filter paper does not change color, it is considered qualified. 1) The valve model should indicate the required national standard number. If it is an enterprise standard, relevant explanations of the model should be provided. 2) The valve working pressure is required to be ≥ the pipeline working pressure. Without affecting the price, the working pressure the valve can withstand should be greater than the actual working pressure of the pipeline. 3) For valve manufacturing standards, the national standard number relied upon should be specified. If it is an enterprise standard, enterprise documents should be attached to the procurement contract.

PONAR WADOWICE valve classification

1) Straight-through globe valve 2) Y-pattern globe valve: In Y-pattern or Y-pattern globe valves, the flow channel of the valve body forms an oblique line with the main flow channel. This results in less disruption of the flow state compared to conventional globe valves, and thus the pressure loss through the valve is correspondingly smaller. 3) Angle globe valve: In angle globe valves, the fluid only needs to change direction once, resulting in a lower pressure drop through this valve compared to conventional structure globe valves. American standard bellows globe valve ZDAJ41W type stainless steel valve body American standard bellows globe valve ZDAJ41W type stainless steel valve body 4) Plunger globe valve: This form of globe valve is a variant of the conventional globe valve. In this valve, the disc and seat are usually designed based on the plunger principle. The disc is polished into a plunger and connected to the valve stem. Sealing is achieved by two elastic sealing rings sleeved on the plunger. The two elastic sealing rings are separated by a collar, and the sealing rings around the plunger are pressed firmly by the load applied to the bonnet via the bonnet nut. The elastic sealing rings can be replaced and can be made from various materials. This valve is mainly used for "open" or "close" functions, but with specially shaped plungers or special collars, it can also be used for flow regulation.

Weidou Intelligent Technology specializes in selling German PONAR WADOWICE valves, PONAR WADOWICE safety valves, PONAR WADOWICE globe valves, PONAR WADOWICE control valves, PONAR WADOWICE solenoid valves, PONAR WADOWICE ball valves, PONAR WADOWICE proportional valves, PONAR WADOWICE diaphragm valves, PONAR WADOWICE butterfly valves, PONAR WADOWICE hydraulic transmission valves, PONAR WADOWICE check valves, PONAR WADOWICE pressure reducing valves, PONAR WADOWICE relief valves, PONAR WADOWICE sequence valves, PONAR WADOWICE balance valves, PONAR WADOWICE throttle valves, PONAR WADOWICE directional control valves. Original imports from Germany. Welcome customers to inquire and order.