German FLUID TEAM valves, FLUID TEAM models, FLUID TEAM prices

FLUID TEAM valves serve an on/off function. They are commonly installed at the inlets and outlets of cold and heat sources, equipment inlets and outlets, and pipeline branches (including risers), and can also be used as drain valves and air vent valves. Common shut-off valves include gate valves, globe valves, ball valves, and butterfly valves. Gate valves can be classified into rising stem and non-rising stem, single wedge and double wedge, as well as wedge-shaped gate and parallel gate types. Gate valves do not provide tight shutoff, and large-diameter gate valves are difficult to open; the valve body size is small along the flow direction, resulting in low flow resistance, and gate valves cover a wide range of nominal diameters. Globe valves are classified by medium flow direction into straight-through, angle, and Y-pattern types, with rising stem and non-rising stem variants. Globe valves provide better shutoff tightness than gate valves, have a longer valve body, higher flow resistance, and a maximum nominal diameter of DN200. The ball valve core is a perforated sphere. Rotating the valve stem aligns the sphere's bore with the pipeline axis for full open position, and rotating it 90° achieves full closure. Ball valves have certain throttling capabilities and provide relatively tight shutoff. The butterfly valve core is a circular disc that rotates around a vertical axis perpendicular to the pipeline axis. When the disc plane is aligned with the pipe axis, it is fully open; when the disc plane is perpendicular to the pipe axis, it is fully closed. Butterfly valves have a short body length, low flow resistance, and are more expensive than gate valves and globe valves. The butterfly valve core is a circular disc that rotates around a vertical axis perpendicular to the pipeline axis. When the disc plane is aligned with the pipe axis, it is fully open; when the disc plane is perpendicular to the pipe axis, it is fully closed. Butterfly valves have a short body length, low flow resistance, and are more expensive than gate valves and globe valves.

FLUID TEAM valve accessories

Valves and fittings are used for pipeline connection or control systems; neither valves nor fittings can exist independently, as they complement each other. Valve fittings are available in carbon steel, stainless steel, and PVC, or other materials. The first two are the most commonly used. In recent years, with the improvement of living standards, demand for processed food has increased, driving the rapid development of food machinery. Consequently, the production industry for stainless steel sanitary valves and fittings has flourished. When people refer to valve fittings, they mostly mean stainless steel sanitary grade products.

Precautions for FLUID TEAM valve specifications

Acceptance follows HG 20202-2000 "Code for Construction and Acceptance of Degreasing Engineering". Before assembly, each component is wiped with clean precision filter paper; if the filter paper does not change color when applied to dead corners of the component, it is considered qualified. 1) The valve model shall indicate the applicable national standard number. If an enterprise standard applies, relevant specifications for the model shall be provided. 2) The valve working pressure shall be ≥ the pipeline working pressure; without affecting the price, the pressure the valve can withstand should be greater than the actual pipeline working pressure. 3) For the valve manufacturing standard, the applicable national standard number shall be stated; if an enterprise standard applies, enterprise documentation shall be attached to the procurement contract.

Common faults of FLUID TEAM valves

During continuous use, the rubber elastomer in butterfly valves may experience tearing, wear, aging, perforation, or even detachment. Traditional hot vulcanization processes are difficult to adapt to on-site repair needs, requiring specialized equipment, consuming significant thermal and electrical energy, and being time-consuming and labor-intensive. Nowadays, polymer composite material methods are gradually replacing traditional methods, with the Fushilan technology system being the most widely applied. Its products possess superior adhesion and excellent wear and tear resistance, ensuring that repaired components achieve or even exceed the service life of new parts, significantly reducing downtime.

Weidou Intelligent Technology specializes in selling German FLUID TEAM valves, FLUID TEAM safety valves, FLUID TEAM globe valves, FLUID TEAM control valves, FLUID TEAM solenoid valves, FLUID TEAM ball valves, FLUID TEAM proportional valves, FLUID TEAM diaphragm valves, FLUID TEAM butterfly valves, FLUID TEAM hydraulic actuated valves, FLUID TEAM check valves, FLUID TEAM pressure reducing valves, FLUID TEAM relief valves, FLUID TEAM sequence valves, FLUID TEAM balance valves, FLUID TEAM throttle valves, FLUID TEAM directional control valves. Original imports from Germany. Welcome inquiries and orders from users.