German FAMATEC valves FAMATEC models FAMATEC prices

FAMATEC valves, also known as pinch valves, tube squeeze valves, bladder valves, and hose pinch valves. They use pneumatic, electric, manual, or hydraulic actuation to compress the sleeve for on/off or regulation functions. Solenoid pinch valves are a type of pinch valve. The sleeve (hose) is the most critical component of a pinch valve, providing corrosion resistance, wear resistance, and pressure-bearing capacity. Additionally, the quality of internal components such as the solenoid coil, armature, and spring affects valve life. Driven by an electromagnetic solenoid, it controls flow by squeezing or releasing the hose. The medium flows only through the hose, and other parts of the valve body do not come into contact with the medium, which means that compared to other types of solenoid valves, pinch valves can handle media with particles without clogging.

FAMATEC valve features

1) The voltage range is the widest among imported products, allowing a fluctuation range of ±5%. 2) Wide application range, suitable for most microfluidic fields. 3) Low power consumption and good heat dissipation efficiency. 4) Dedicated matching hoses ensure optimal rebound life. 5) Stable product performance and quality. 6) Maintenance requires only replacing the hose fittings, making it relatively economical.

FAMATEC valve installation

Silicone hose (inner wall is very smooth, excellent memory; the tube will not stick even after long periods in the closed state). Biochemical hose (resistant to acid, alkali, and solvent media, but not recommended for use in oily or organic solvents). The hose installation groove on the valve body has a smooth arc structure, allowing users to easily install and remove hoses. The gap in the hose installation groove is slightly smaller than the outer diameter of the hose, ensuring the hose is tightly fixed during operation.

FAMATEC valve usage precautions

For valves in operation, all valve components should be complete and intact. Bolts on flanges and supports must not be missing; threads should be undamaged, and loosening is not permitted. If the locking nut on the handwheel is found loose, it should be tightened promptly to prevent wear at the connection or loss of the handwheel and nameplate. If the handwheel is lost, it must not be replaced with an adjustable wrench; it should be replaced promptly. The packing gland must not be skewed or lack pre-tightening clearance. For valves in environments prone to contamination by rain, snow, dust, sand, etc., protective covers must be installed on the valve stems. Scales on valves should remain complete, accurate, and clear. Lead seals, caps, pneumatic accessories, etc., on valves should be complete and intact. Insulation jackets should have no dents or cracks. Striking, standing on, or supporting heavy loads on operating valves is not permitted; this is strictly prohibited for non-metallic valves and cast iron valves.

Weidou Intelligent Technology specializes in selling German FAMATEC valves, FAMATEC safety valves, FAMATEC globe valves, FAMATEC control valves, FAMATEC solenoid valves, FAMATEC ball valves, FAMATEC proportional valves, FAMATEC diaphragm valves, FAMATEC butterfly valves, FAMATEC hydraulic transmission valves, FAMATEC check valves, FAMATEC pressure reducing valves, FAMATEC relief valves, FAMATEC sequence valves, FAMATEC balance valves, FAMATEC throttle valves, FAMATEC directional control valves. Original German imports. Welcome customers to inquire and order.