luft wolf air compressor, original imported special offer

luft wolf compressors are driven fluid machinery that raise low-pressure gas to high-pressure gas and are the heart of refrigeration systems.luft wolfDraws in low-temperature, low-pressure refrigerant gas through the suction pipe, compresses it via piston movement driven by motor operation, and discharges high-temperature, high-pressure refrigerant gas through the discharge pipe, providing power for the refrigeration cycle. This enables the refrigeration cycle of compression, condensation (heat release), expansion, and evaporation (heat absorption). luft wolf compressors are classified intoluft wolfpiston compressors,luft wolfscrew compressors,luft wolfcentrifugal compressors,luft wolflinear compressors, etc.

luft wolf Company Introduction

luft wolf successfully established its company in 1990 by leveraging professional expertise and extensive experience to provide comprehensive services in Thuringia, Germany, and has since developed into one of the leading specialists in compressed air in the region. luft wolf offers a full range of products related to compressors, compressed air, power tools, and hydraulic systems. Whether for complete container solutions, production, or craft applications—we convince with competence, service, and the performance of qualified staff. At luft wolf’s business premises, you will find a wide variety of compressors, accessories, tools, cleaning technology, and more.

luft wolf Air Compressors   and Accessories Introduction

luft wolf holds stock of over 120,000 items of compressors and compressor accessories, including:

luft wolf Line connectors: 9393 items

luft wolf Threaded fittings: 27051 items

luft wolf Couplings: 33544 items

luft wolf Hoses-Pipes-Clamps: 46975 items

luft wolf Ball valves-Accessories: 55196 items

luft wolf Pressure regulators-Pressure gauges-Thermometers-Processing units: 610236 items

luft wolf Valves-Throttles-Silencers: 74005 items

luft wolf Cylinders-Shock absorbers-Vacuum components: 84605 items

luft wolf Blow guns-Pneumatic tools-Tools: 9747 items

luft wolf Industrial supplies: 1014930 items

luft wolf Festo pneumatic components: 1219918 items

luft wolf AVENTICS pneumatic components: 1314103 items

SMC pneumatic 1462825 components

luft wolf Hydac hydraulic system 15585 components

luft wolf air compressor   precautions for use

luft wolf compressor piping, foundation and cooling system, air pipeline piping precautions:

1). When piping the main line, the pipeline must have an inclination of 1°~2° to facilitate the discharge of condensate in the pipeline.

2). The pressure drop of the piping shall not exceed 5% of the compressor set pressure, so it is best to select a larger pipe diameter when piping.

3). Branch lines must be connected from the top of the main line to prevent condensate in the line from flowing down to the gas-using equipment. luft wolf compressor air outlet lines should preferably have a check valve.

4). When several luft wolf compressors are installed in series, a ball valve or automatic drain valve must be installed at the end of the main line to facilitate condensate discharge.

5). Do not arbitrarily reduce the size of the main line. If the pipeline must be reduced or enlarged, a reducer must be used; otherwise, mixed flow will occur at the joint, resulting in significant pressure loss and affecting the service life of the pipeline.

6). If there are purification and buffering facilities such as air receivers and dryers after the luft wolf compressor, the ideal piping configuration is: compressor + air receiver + pre-filter + dryer + post-filter + precision filter. In this way, the air receiver can filter out part of the condensate, and also has the function of reducing the gas exhaust temperature. Air with lower temperature and less water content then enters the dryer, which can reduce the load on the dryer or filter.

7). If the system's air consumption is large and the time is short, with large changes in instantaneous air consumption, it is advisable to install an air receiver for buffering (its capacity should be greater than or equal to 20% of the maximum instantaneous air volume). This can reduce the number of frequent loading or unloading cycles of the luft wolf compressor unit, reduce the number of actions of control elements, and is very beneficial for maintaining the operational reliability of the compressor. Generally, an air receiver with a capacity of 20% of the exhaust volume can be selected.

8). For compressed air with a system pressure below 1.5MPa, the flow velocity in the delivery pipe must be below 15m/sec to avoid excessive pressure drop.

9). Minimize the use of elbows and various valves in the pipeline to reduce pressure loss.

10). The ideal piping is a main line looping around the entire plant, so that compressed air can be obtained from both directions at any location. If the air consumption at a certain branch suddenly increases significantly, the pressure drop can be reduced. Appropriate valves are configured on the loop main line for isolation during maintenance.

luft wolf is a professional air compressor manufacturer, complying with the functional quality management system of DIN EN ISO 9001:2008. In addition to German customers, the customer base includes Kosovo, Bulgaria, Romania, Poland, Russia, China, etc. Users are welcome to inquire and order.