bosche miniature load cell, original from Germany

      bosche load cells are the core components of modern scales. Depending on the type and model of the scale, it may have multipleboscheload cells. For smaller platforms meeting relatively low rated loads, usually only oneboscheload cell (single-point scale) is sufficient. Larger platform scales, floor scales, pallet scales, and many other weighing systems tend to be equipped with 4 or moreboscheshear beam load cells. The accuracy of the instrument and the repeatability of measurement values depend on the quality of the load cells. Therefore, bosche force sensors have an accuracy of at least 0.03. Most bosche sensors meet the requirements of OIML accuracy class C3. bosche load cells comply with the strict requirements applicable to verified scales. All bosche load cells are designed as strain gauges with a full-bridge circuit. The output/full-bridge signal of the load cell is in units of mV / V. bosche load cells are based on four-wire technology and can be upgraded to six-wire upon request.

bosche load cell selection:

bosche load cells must be selected according to the actual application. Hanging scales for measuring tensile force and similar weighing systems require S-shaped force sensors. In cases where force is applied vertically, shear beams are a good choice. The second key parameter to consider when selecting a load cell is the rated load. Single-point load cells with a nominal weight not exceeding 2000 kg are typically used to achieve low weights and high resolution in the range of g or mg. For weights up to 150 tons or more, compression load cells are the preferred solution.

bosche load cell specifications and models:

B10S bending beam load cell, capacity: 50-500 kg, alloy steel, laser welded

B10N bending beam load cell, capacity: 5-500 kg, stainless steel, laser welded

K10S shear beam load cell, capacity: 200-2.000 kg, nickel-plated alloy steel

K20N shear beam load cell, capacity: 1.000-5.000 kg, stainless steel

K30S shear beam load cell, capacity: 500-10.000 kg, nickel-plated alloy steel, laser welded

K30N shear beam load cell, stainless steel, capacity: 500-10.000 kg, stainless steel, laser welded

K40N shear beam load cell, capacity: 500-2.500 kg, stainless steel, laser welded

K90S rectangular load cell, capacity: 550-2.000 kg, nickel-plated alloy steel, laser welded

H07A miniature load cell, capacity: 2-5 kg, material: aluminum

H08A miniature load cell, miniature double bending beam weight sensor, capacity: 1-5 kg, material: aluminum

H10A aluminum single-point load cell, capacity: 8-40 kg, material: aluminum

H20A Plattfor platform load cell with OIML, single-point load cell, capacity: 20-100 kg, material: aluminum

H30A single-point load cell, double bending beam load cell - suitable for trade, capacity: 15-300 kg, material: aluminum

H40A single-point load cell, OIML single-point load cell, capacity: 100-500 kg, material: aluminum

H42A single-point load cell, double-ended shear beam load cell with OIML certificate, capacity: 150-750 kg, material: aluminum

H44A single-point load cell, load cell suitable for bench scales, capacity: 100-750 kg, material: aluminum

H50A single-point load cell, capacity: 50-2.000 kg, material: aluminum

H60N single-point load cell, strain gauge single-point load cell, capacity: 250-1.250 kg, stainless steel, laser welded

H62N platform load cell, single-point load cell, fully sealed, capacity 20-200 kg,stainless steel, laser welded

S20S load cell, capacity: 100-1.000 kg, alloy steel, nickel-plated

S20N load cell, stainless steel S type load cell, capacity: 100-1.000 kg, material: stainless steel

S21S load cell, capacity: 2.000-5.000 kg, alloy steel, laser welded

S21N load cell, capacity: 2.000-5.000 kg, stainless steel, laser welded

S40S load cell, capacity: 20-75 kg, alloy steel

X40S transverse shear beam - special load cell, transverse shear beam, capacity: 10.000-100.000 kg, material: alloy steel

C30S compression load cell, capacity: 30-50 kg, alloy steel

D50S double shear beam load cell - onboard weighing, capacity: 10.000 kg, painted steel, IP 68

V70N electropolished load cell for food and pharmaceutical industries, pancake load cell, capacity 0.5-30 t, electropolished stainless steel, laser welded

D55S load beam, ladle turning scale double-ended shear beam, capacity: 50.000-200.000 kg, alloy steel, laser welded

D56S onboard weighing, double shear beam load cell, capacity: 10.000-50.000 kg, alloy steel, laser welded

C50N tension and compression, capacity 10.000 kg-100.000 kg, stainless steel, laser welded

H90A single-point load cell, capacity: 750-1.200 kg, material: aluminum

P20A planar beam load cell, capacity: 11.3-109 kg, material: aluminum

C36S pressure-load cell, capacity: 20-100 t, alloy steel, laser welded

V60S tension and compression load cell, capacity: 3-20 t, alloy steel, laser welded

V51S strain gauge load cell, ring torsion load cell, capacity: 1-4.7 t, alloy steel, laser welded

V50S ring torsion load cell, capacity: 10-150 t, alloy steel, laser welded

V10S low-profile compression load cell, capacity: 3-10t, alloy steel, laser welded

D51S onboard load cell, double shear beam load cell, capacity: 10-30 t, alloy steel, laser welded

K24N shear beam load cell, capacity: 1.000-10.000 kg, stainless steel, laser welded

F10N tension and compression load cell, capacity: 500-1.000 kg, stainless steel, laser welded

D10N double-ended center-loaded shear beam load cell, capacity: 4.536-90.720 kg, stainless steel, laser welded

L series load pin pressure pin, load pin, capacity: custom alloy steel or stainless steel

D30S double-ended beam load cell, truck scale load cell, capacity: 20-40 t, alloy steel, laser welded

V50S multi-column load cell, up to 200t, made of stainless steel, ring torsion load cell, capacity: 10-150 t, alloy steel, laser welded

X40S transverse shear bar - special load cell, transverse shear beam, capacity: 10,000-100,000 kg, material: alloy steel

X40S transverse shear beam, capacity: 10.000-100.000 kg, material: alloy steel

bosche load cell applications:

bosche load cells are widely used where tensile or compressive forces need to be measured or where deformation of solid components must be determined. They come in various designs and require additional equipment to evaluate the measured force. For this purpose, BOSCHE provides a range of electronic devices including transmitters. Thus, we can meet the needs of all applications, from simple weight display to conversion and amplification of output signals for downstream processing in PLC. We also offer solutions that meet the requirements for potential-free contact relay switching. Our weighing solutions can be customized to your specific needs. In addition to standardized packages, we also provide tailored solutions for integration into existing systems.