TPGC070078 magnets as robot arm end tools,When you want to use a robot to pick, place, or position flat steel products,TPGC070078magnetic grippers are an ideal choice. Applications are highly diverse, for example:pick-and-place of steel parts,handling perforated sheets with robotic arms,unloading workpieces from crates (bin picking),positioning sheets in printing presses,stacking or destacking hot baking tins,high-temperature grippers are suitable for the last example. For instance, you can also use it to load and unload high-grade steel in presses; it is formed at high temperatures.

TPGC070078 magnetic gripper switching and control

TPGC070078 magnetic switching is pneumatic. This moves the magnetic field to turn it on and off. Control can be performed using 5/3 or 5/2 valves. Even in the event of loss of air pressure or power, an activated magnetic gripper will not release its load. This makes it a safe and reliable end-of-arm solution.

Points to note when using TPGC070078 magnetic grippers:

When using thin sheets (≤ 1 mm), you must consider the "peeling effect." This reduces the maximum separation force. In this case, it is better to create a structure with multiple smaller grippers (e.g., 40 x 40 mm) compared to one or two large grippers.

When the gripper contacts the sheet, the sheet may be damaged. If this is a concern, select a version with protective polyurethane caps (friction type).

When handling oiled paper or under high acceleration of the robotic arm, the paper may shift position. This can also be prevented by using types with polyurethane friction pads.

Sometimes the surface of the sheet is not flat, so vacuum does not work. In this case, magnetic grippers are an ideal solution. The larger the contact surface area, the better, but magnetic grippers always apply to ferromagnetic steel. Therefore, they also work on circular shapes.

Vacuum does not work when sheets have holes; magnetic grippers do. In this case, select grippers sized larger than the holes and thoroughly test the selected solution.

For small workpieces, Goudsmit offers very small grippers. They have a low overall height and provide additional strength to hold workpieces in place. For example, select type HGR-RO-020.

For thin papers stuck together (≤4 mm) and oily paper, robots sometimes pick up several sheets at once. Sheet separators prevent this. They are available in permanent and pneumatically switchable versions.

Weidou Intelligent Technology (Shanghai) Co., Ltd. specializes in the agency sales of TPGC070078 magnets,TPGC070078 grippers,TPGC070078 magnetsOriginal European import,TPGC070078 magnetsAmple stock in Shanghai. For questions regarding magnets related to TPGC070078, please contact our company.