TPGC100088 handling magnets, TPGC100088 magnetic chucks, TPGC100088 magnetic fixtures

goudsmit magnets Shanghai stock sales

Goudsmit Magnetics was founded in 1959 and is an international leading manufacturer of magnetic systems for various applications. The headquarters of Goudsmit is located at Smart Port in the Waalre region of the Netherlands. The company's expert team focuses on designing, developing, and building high-tech magnet systems, as well as continuously producing complex magnetic control components. Goudsmit's magnetic products can be used in industries such as automotive, food, recycling, metal, pharmaceuticals, marine, chemical, and aerospace.

TPGC100088 magnet performance introduction:

Magnet number TPGC100088

Description friction type - #100 mm  -  1180 N.

Product key HGR-SQ-100-FP-R-G-S

TPGC100088 magnetDelivery time：(If not in stock) 4-6 weeks

Specific application x

Switching：Pneumatic

Includes vulcanized friction pads to provide additional grip and product protection

TPGC100088 magnetRecommended working load：390 N (under ideal conditions - safety factor 3 complies with EN13155)

TPGC100088 magnet*Maximum tear force：1180 N (under ideal conditions - chart: see file label - factors affecting lifting capacity: see lifting magnets)

TPGC100088 magnet*Minimum recommended plate thickness：3 mm

Interface/connection dim threaded hole M6 (8x) threaded hole M10

Pneumatic connection: G¼" (2x)

TPGC100088 magnetMaterial：Friction pad/ring NBR 60°Shore A.

Material：Housing aluminum AISI316L (SS 1.4404) (nut)

TPGC100088 magnetSurface treatment：/fine anodized

Color：Red

Min./max. Ambient temperature 0 to 70°C

TPGC100088 magnetSwitching pressure max: 4bar

Air consumption 0.338 liters/cycle (1 times rise, 1 times fall)

Magnetic system 8 permanent magnet poles

Magnet quality：Neodymium GSN-45, Br 13, 700 Gauss (20°C), Tmax. 80°C

Additional information x

Depth：106 mm

Width：106 mm

Height：71 mm

TPGC100088 magnetWeight：1, 5 kg

TPGC100088 Magnet applications:

1). When handling thin sheets (≤ 1mm), the "peeling effect" must be considered. This reduces the separation force. In this case, use one or two large magnets in combination with a structure featuring multiple smaller magnets (e.g., 40 × 40mm).

2). When Goudsmit magnets contact paper, the paper may be damaged. In this case, select the version with polyurethane protective caps (Goudsmit friction type).

3). When using oiled paper or with high acceleration of the robotic arm, the paper can shift. This can also be prevented by using types with Goudsmit polyurethane friction pads.

4). Sometimes the sheet surface is uneven, in which case vacuum clamps are ineffective; Goudsmit magnets are an ideal solution. The larger the contact area, the better, but Goudsmit magnets always work (on ferromagnetic steel), even if circular.

5). Another situation where vacuum is ineffective is with perforated sheets. This poses no problem for Goudsmit magnets. Ensure you select a clamp sized larger than the holes and thoroughly test the chosen solution.

6). For small workpieces, Goudsmit offers very small magnets with low mounting height in its product range, providing additional holding strength. For example, choose model HGR-RO-020.

7). For thin sheets (≤4mm) and oily sheets that stick together, robots sometimes pick up multiple sheets at once. Sheet separators prevent this. These are available for Goudsmit permanent and pneumatically switchable versions.

Goudsmit Magnet Product Model Introduction:

Goudsmit Magnet TPGC020018 HGR-RO-020-FL-R-M-F Basic Type Magnet Size 20 mm  Magnetic Force 10N

Goudsmit Magnet TPGC024078 HGR-SQ-024-FL-R-M-F Basic Type Magnet Size 24 mm  Magnetic Force 34N

Goudsmit Magnet TPGC024088 HGR-SQ-024-FP-R-M-F Friction Type     Magnet Size 24 mm  Magnetic Force 24N

Goudsmit Magnet TPGC040078 HGR-SQ-040-FL-R-M-S Basic Type   Magnet Size 40 mm  Magnetic Force 230N

Goudsmit Magnet TPGC040088 HGR-SQ-040-FP-R-M-S Friction Type   Magnet Size 40 mm  Magnetic Force 140N

Goudsmit Magnet TPGC040378 HGR-SQ-040-FL-RH-M-F High-Temperature Type   Magnet Size 40 mm  Magnetic Force 185N

Goudsmit Magnet TPGC070078 HGR-SQ-070-FL-R-G-S Basic Type   Magnet Size 70 mm  Magnetic Force 530N

Goudsmit magnet TPGC070088 HGR-SQ-070-FP-R-G-S friction type   Magnet size 70 mm  Magnetic force 380N

Goudsmit magnet TPGC070378 HGR-SQ-070-FL-RH-G-F high-temperature type   Magnet size 70 mm  Magnetic force 420N

Goudsmit magnet TPGC100014       HGR-RO-100-FR-F-G-S Basic type       Magnet size 100 mm Magnetic force 245N

Goudsmit magnet TPGC100038 HGR-RO-100-OR-RH-G-F High-temperature type     Magnet size 100 mm  Magnetic force 480N

Goudsmit magnet TPGC100078 HGR-SQ-100-FL-R-G-S basic type   Magnet size 100 mm  Magnetic force 1500N

Goudsmit magnet TPGC100088 HGR-SQ-100-FP-R-G-S friction type   Magnet size 100 mm  Magnetic force 1180N

Goudsmit magnet TPGC100378 HGR-SQ-100-FL-RH-G-F high-temperature type   Magnet size 100 mm  Magnetic force 1200N

Goudsmit magnet TPGC160078 HGR-SQ-160-FL-F-G-S basic type   Magnet size 160 mm  Magnetic force 3500N

Goudsmit magnet accessories

Goudsmit spring plunger TPGC990001 HGA-PL-S-M10-M24-RO-FL

Goudsmit spring plunger TPGC990005 HGAZ-PL-S-M10-M24-RO-RI

Goudsmit sheet diaphragm ferrite TBSP020400 HSS-F-BA-114x047-0400-B