Goudsmit Magnetics supplies permanent magnets, magnet assemblies, pot magnets and electromagnets compliant with RoHs and REACH standards worldwide. Goudsmit Magnets hold the following certifications: ISO9001: 2015, IATF 16949: 2016 and AS9100D. It is a reliable magnet supplier for the automotive, offshore, electric vehicle, aerospace and aviation industries, medical sector and sustainable technologies. Goudsmit's QA / QC engineers have advanced measuring equipment, conditioned measurement rooms, customer-specific traceability and robotic assembly, ensuring that Goudsmit's magnets and magnetic systems meet specified requirements. Goudsmit Magnets not only provides stock magnets, but also customer-specific high-tech magnets and magnetic systems.

TPGC160078 Magnet Introduction:

Magnet number：TPGC160078

Basic description： - ＃160 mm  -  3500 N.

Product key：HGR-SQ-160-FL-F-G-S

Delivery time：(if not in stock) 4-6 weeks

Switching: pneumatic

TPGC160078 MagnetRecommended working load：1170 N (under ideal conditions - safety factor 3 according to EN13155)

TPGC160078 Magnet*Maximum tear-off force：3500 N (under ideal conditions - chart: see file label - factors affecting lifting capacity: see lifting magnets)

TPGC160078 Magnet*Minimum recommended plate thickness：3 mm

Interface/Connection：dim threaded holes M8 (8x) threaded holes M12

Pneumatic connection: G ¼" (2x)

Housing material：Aluminum AISI316L (SS 1.4404) (locknut)

Surface treatment：Finish anodized

Color：Red

Min./max Ambient temperature：0 to 70°C

Switching pressure* max：4bar

Air consumption：1.302 liters/cycle (1x rise, 1x fall)

Magnetic system：12 permanent magnetic poles

TPGC160078Magnet quality：Neodymium GSN-45, Br 13, 700 Gauss (20°C), Tmax. 80°C

Depth：170 mm

Width：170 mm

Height：103 mm

TPGC160078 MagnetWeight：5, 7 kg

TPGC160078 Magnet applications:

1). When handling thin sheets (≤1mm), the "peeling effect" must be considered. This reduces the separation force. In this case, use one or two large magnets in combination with a structure featuring multiple smaller magnets (e.g., 40×40mm).

2). When Goudsmit magnets come into contact with paper, the paper may be damaged. In this case, select the version with polyurethane protective caps (Goudsmit friction type).

3). When using oiled paper or with high acceleration of the robotic arm, the paper may shift. This can also be prevented by using types with Goudsmit polyurethane friction pads.

4). Sometimes the sheet surface is uneven, in which case vacuum grippers do not work; then Goudsmit magnets are an ideal solution. The larger the contact area, the better, but Goudsmit magnets always work (on ferromagnetic steel), even if circular.

5). Another situation where vacuum does not work is with perforated sheets. This poses no problem for Goudsmit magnets. Ensure that the selected gripper is larger than the holes and thoroughly test the chosen solution.

6). For small workpieces, Goudsmit has very small magnets in its product range with low mounting height, providing additional holding force for workpieces. For example, select the HGR-RO-020 model.

7). For thin sheets (≤4mm) and oily sheets that stick together, robots sometimes pick up several sheets at once. Sheet separators prevent this. These are available for Goudsmit permanent and pneumatically switchable versions.

Goudsmit magnet product model introduction:

Goudsmit magnet TPGC020018 HGR-RO-020-FL-R-M-F Basic type Magnet size 20 mm  Magnetic force 10N

Goudsmit magnet TPGC024078 HGR-SQ-024-FL-R-M-F Basic type Magnet size 24 mm  Magnetic force 34N

Goudsmit magnet TPGC024088 HGR-SQ-024-FP-R-M-F Friction type     Magnet size 24 mm  Magnetic force 24N

Goudsmit magnet TPGC040078 HGR-SQ-040-FL-R-M-S Basic type   Magnet size 40 mm  Magnetic force 230N

Goudsmit magnet TPGC040088 HGR-SQ-040-FP-R-M-S Friction type   Magnet size 40 mm  Magnetic force 140N

Goudsmit magnet TPGC040378 HGR-SQ-040-FL-RH-M-F High-temperature type   Magnet size 40 mm  Magnetic force 185N

Goudsmit magnet TPGC070078 HGR-SQ-070-FL-R-G-S Basic type   Magnet size 70 mm  Magnetic force 530N

Goudsmit magnet TPGC070088 HGR-SQ-070-FP-R-G-S Friction type   Magnet size 70 mm  Magnetic force 380N

Goudsmit magnet TPGC070378 HGR-SQ-070-FL-RH-G-F High-temperature type   Magnet size 70 mm  Magnetic force 420N

Goudsmit magnet TPGC100014       HGR-RO-100-FR-F-G-S Basic type       Magnet size 100 mm Magnetic force 245N

Goudsmit magnet TPGC100038 HGR-RO-100-OR-RH-G-F High-temperature type     Magnet size 100 mm  Magnetic force 480N

Goudsmit magnet TPGC100078 HGR-SQ-100-FL-R-G-S Basic type   Magnet size 100 mm  Magnetic force 1500N

Goudsmit magnet TPGC100088 HGR-SQ-100-FP-R-G-S Friction type   Magnet size 100 mm  Magnetic force 1180N

Goudsmit magnet TPGC100378 HGR-SQ-100-FL-RH-G-F High-temperature type   Magnet size 100 mm  Magnetic force 1200N

Goudsmit magnet TPGC160078 HGR-SQ-160-FL-F-G-S Basic type   Magnet size 160 mm  Magnetic force 3500N

Weidou Intelligent Technology professionally acts as an agent and distributor for Goudsmit magnets, Goudsmit spring plungers, Goudsmit magnetic fixtures, and Goudsmit magnetic chucks. Through close cooperation with the original Goudsmit manufacturer, we provide customers with high-quality pre-sales and after-sales services.