IHG
Brand reference:75679
Products from this brand
German IHG bearings, IHG models, IHG prices
IHG bearings are bearings that operate under sliding friction. Plain bearings operate smoothly, reliably, and without noise. Under liquid lubrication conditions, the sliding surfaces are separated by lubricating oil without direct contact, which can greatly reduce friction loss and surface wear. The oil film also has a certain vibration absorption capacity. However, the starting friction resistance is relatively high. The part of the shaft supported by the bearing is called the journal, and the part mating with the journal is called the bearing bush. To improve the friction properties of the bearing bush surface, an anti-friction material layer cast on its inner surface is called the bearing lining. The materials of the bearing bush and bearing lining are collectively referred to as plain bearing materials.
German IHG springs IHG models IHG prices
IHG springs are a special type of extension spring, suitable for applications with large elongation and non-increasing load. Constant-force springs consist of spiral metal strips; the inner side of the strip is curved so that each coil wraps tightly around the inner coil. When the metal strip is stretched (twisted), internal stress resists the load force, just like a standard extension spring, but the spring rate is nearly constant (zero). See the load/torsion diagram. In use, an ID is typically used to wind this spring tightly onto a drum, with its free end connected to the load, similar to a counterweight.