KTR
Brand reference:74970
Products from this brand
German KTR sensors, KTR models, KTR prices
KTR pressure sensors for liquid level measurement. Submersible static pressure level transmitters (level gauges) operate on the principle that the static pressure of the measured liquid is proportional to its height. They use advanced imported isolated diffused silicon sensitive elements or ceramic capacitive pressure sensitive sensors to convert static pressure into electrical signals. These signals undergo temperature compensation and linear correction to become standard electrical signals (typically 4 to 20mA/15VDC). KTR sensor classification: 1) Laser speed measurement: With the rise of precision manufacturing and the need for cost savings, non-contact speed sensors are gradually replacing contact speed sensors.
German KTR coupling KTR model KTR price
KTR couplings are components that connect the prime mover to the driven machine. Their main function is overload protection. The torque limiter restricts the torque transmitted by the drive system by slipping when the required torque exceeds the set value due to overload or mechanical failure. It automatically re-engages once the overload condition disappears. This prevents mechanical damage and avoids costly downtime losses. KTR coupling introduction: Using just one mechanical torque limiter can quickly disconnect the motor from the spindle, thereby eliminating the destructive effects of inertial forces. For ordinary machinery, including conveyors
German KTR bearings KTR models KTR prices
KTR bearings can simultaneously withstand radial and axial loads. They can operate at higher speeds. The greater the contact angle, the higher the axial load capacity. The contact angle is the angle between the line connecting the contact points of the ball and raceway in the radial plane and the perpendicular to the bearing axis. High-precision and high-speed bearings typically use a 15 degree contact angle. Under axial force, the contact angle increases. KTR bearing introduction: Self-aligning ball bearings are bearings with spherical balls assembled between an inner ring with two raceways and an outer ring with a spherical raceway. The center of curvature of the outer ring raceway surface coincides with the bearing center, so it has the same self-aligning function as
Germany KTR seals KTR models KTR prices
KTR seals refer to devices that prevent fluid leakage, formed by at least one pair of end faces perpendicular to the axis of rotation maintaining contact and sliding relative to each other under the action of fluid pressure and the elastic force (or magnetic force) of the compensation mechanism, in conjunction with auxiliary seals. When the auxiliary seal of the compensation ring is a metal bellows, it is called a bellows mechanical seal. There are mainly the following four types of components. a. Primary sealing elements: rotating ring and stationary ring. b. Auxiliary sealing elements: O-rings. c. Clamping elements: springs, thrust rings. d. Drive elements: spring seats and keys or set screws. KTR seal principle Mechanical seals are